SEC Filing | FormFactor, Inc.

View:

Download DOC

Download PDF

Download XLS

e10vq

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-Q

(Mark one)


þ		QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934


		For the quarterly period ended September 24, 2005


o		TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934


		For the transition period from to

Commission file number: 000-50307

FormFactor, Inc.

(Exact name of registrant as specified in its charter)


Delaware		13-3711155
(State or other jurisdiction of		(I.R.S. Employer
incorporation or organization)		Identification No.)

7005 Southfront Road, Livermore, California 94551
(Address of principal executive offices, including zip code)

(925) 294-4300
(Registrant’s telephone number, including area code)

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o

Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Exchange Act). Yes þ No o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No þ

The number of shares of the registrant’s common stock, par value $0.001 per share, outstanding as of October 28, 2005 was 40,070,710 shares.

FormFactor, Inc.
Form 10-Q for the Quarterly Period Ended September 24, 2005
Index


	Page
Part I. Financial Information
Item 1. Unaudited Condensed Consolidated Financial Statements		3
Unaudited Condensed Consolidated Statements of Income for the three and nine months ended September 24, 2005 and September 25, 2004		3
Unaudited Condensed Consolidated Balance Sheets as of September 24, 2005 and December 25, 2004		4
Unaudited Condensed Consolidated Statements of Cash Flows for the nine months ended September 24, 2005 and September 25, 2004		5
Notes to Unaudited Condensed Consolidated Financial Statements		6
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations		12
Item 3. Quantitative and Qualitative Disclosures about Market Risk		33
Item 4. Controls and Procedures		33
Part II. Other Information
Item 1. Legal Proceedings		34
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds		35
Item 3. Defaults Upon Senior Securities		35
Item 4. Submission of Matters to a Vote of Security Holders		35
Item 5. Other Information		35
Item 6. Exhibits		35
Signature		36
Exhibit Index
EXHIBIT 31.01
EXHIBIT 31.02
EXHIBIT 32.01

PART I. FINANCIAL INFORMATION

Item 1. Unaudited Condensed Consolidated Financial Statements

FORMFACTOR, INC.

CONDENSED CONSOLIDATED STATEMENTS OF INCOME
(In thousands, except per share amounts)
(Unaudited)


	Three Months Ended						Nine Months Ended
	September 24, 2005			September 25, 2004			September 24, 2005			September 25, 2004
Revenues	$	62,374		$	51,377		$	165,676		$	131,649
Cost of revenues		33,980			25,471			93,105			63,655
Stock-based compensation		108			154			379			466

Gross margin		28,286			25,752			72,192			67,528

Operating expenses:
Research and development (1)		7,700			5,555			18,884			14,420
Selling, general and administrative (1)		10,655			7,904			29,228			20,640
Stock-based compensation		1,397			455			2,632			1,571

Total operating expenses		19,752			13,914			50,744			36,631

Operating income		8,534			11,838			21,448			30,897

Interest income		1,116			635			2,912			1,740
Other income and expense, net		(630	)		(156	)		(655	)		(798	)

		486			479			2,257			942
Income before income taxes		9,020			12,317			23,705			31,839
Benefit from (provision for) income taxes		758			(4,820	)		(4,004	)		(12,483	)

Net income	$	9,778		$	7,497		$	19,701		$	19,356

Net income per share:
Basic	$	0.25		$	0.20		$	0.50		$	0.52

Diluted	$	0.23		$	0.19		$	0.47		$	0.48

Weighted-average number of shares used in per share calculations:
Basic		39,733			37,632			39,343			37,584

Diluted		41,762			40,499			41,492			40,490

(1) Amounts exclude stock-based compensation expense as follows:
Research and development		181			216			577			606
Selling, general and administrative		1,216			239			2,055			965

Total	$	1,397		$	455		$	2,632		$	1,571

The accompanying notes are an integral part of these condensed consolidated financial statements.

FORMFACTOR, INC.

CONDENSED CONSOLIDATED BALANCE SHEETS
(In thousands, except per share amounts)
(Unaudited)


	September 24,			December 25,
	2005			2004
ASSETS
Current assets:
Cash and cash equivalents	$	23,690		$	34,836
Marketable securities		177,892			156,647
Accounts receivable, net of allowance for doubtful accounts of $74 in 2005 and $41 in 2004		35,468			25,054
Inventories		14,416			11,232
Deferred tax assets		9,754			7,587
Prepaid expenses and other current assets		7,522			4,760

Total current assets		268,742			240,116
Restricted cash		2,250			2,250
Property and equipment, net		75,379			59,356
Deferred tax assets		2,665			570
Other assets		473			274

Total assets	$	349,509		$	302,566

LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities:
Accounts payable	$	18,810		$	17,556
Accrued liabilities		20,164			14,685
Deferred revenue and customer advances and other		4,132			2,770

Total current liabilities		43,106			35,011
Deferred revenue and customer advances		16			195
Deferred rent		3,047			2,185

Total liabilities		46,169			37,391

Stockholders’ equity:
Common stock, $0.001 par value		40			39
Additional paid-in capital		264,861			249,149
Deferred stock-based compensation		(3,172	)		(5,413	)
Accumulated other comprehensive loss		(220	)		(730	)
Retained earnings		41,831			22,130

Total stockholders’ equity		303,340			265,175

Total liabilities and stockholders’ equity	$	349,509		$	302,566

The accompanying notes are an integral part of these condensed consolidated financial statements.

FORMFACTOR, INC.

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
(Unaudited)


	Nine Months Ended
	September 24, 2005			September 25, 2004
Cash flows from operating activities:
Net income	$	19,701		$	19,356
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization		12,184			5,397
Stock-based compensation expense		3,011			2,037
Deferred tax benefit		(4,262	)		—
Tax benefit from employee stock option plans		4,379			3,221
Increase (decrease) in allowance for doubtful accounts		33			(5	)
Provision for excess and obsolete inventories		8,085			2,815
Loss on disposal of property and equipment		80			—
Changes in assets and liabilities:
Accounts receivable		(10,447	)		(13,940	)
Inventories		(11,270	)		(4,841	)
Prepaid expenses and other assets		(2,859	)		(1,033	)
Accounts payable		(4,138	)		(537	)
Accrued liabilities		5,576			4,972
Deferred rent		862			—
Deferred revenues and customer advances		1,183			218

Net cash provided by operating activities		22,118			17,660

Cash flows from investing activities:
Acquisition of property and equipment		(21,275	)		(23,407	)
Purchase of marketable securities		(129,135	)		(114,375	)
Proceeds from maturities of marketable securities		106,910			124,365
Restricted cash		—			300
Acquisition of intangible asset		(400	)		—

Net cash used in investing activities		(43,900	)		(13,117	)

Cash flows from financing activities:
Proceeds from issuance of common stock		10,562			7,950
Repayment of notes receivable from stockholders		—			661

Net cash provided by financing activities		10,562			8,611

Effect of exchange rate changes on cash and cash equivalents		74			(8	)
Net increase (decrease) in cash and cash equivalents		(11,146	)		13,146
Cash and cash equivalents, beginning of the period		34,836			12,855

Cash and cash equivalents, end of the period	$	23,690		$	26,001

Supplemental disclosure of significant non-cash investing activities:
Purchases of property and equipment through accounts payable	$	5,443		$	7,692

The accompanying notes are an integral part of these condensed consolidated financial statements.

FORMFACTOR, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS (Unaudited)

Note 1 — Basis of Presentation

The accompanying unaudited condensed consolidated financial statements of FormFactor, Inc. and its subsidiaries (the “Company”) have been prepared in accordance with accounting principles generally accepted in the United States of America for interim financial information and pursuant to the instructions to Form 10-Q and Article 10 of Regulation S-X of the Securities and Exchange Commission. Accordingly, the interim financial statements do not include all of the information and footnotes required by generally accepted accounting principles for annual financial statements. In the opinion of management, all adjustments (consisting only of normal recurring adjustments) considered necessary for a fair statement have been included. Operating results for the three and nine months ended September 24, 2005 are not necessarily indicative of the results that may be expected for the year ending December 31, 2005, or for any other period. The balance sheet at December 25, 2004 has been derived from the audited consolidated financial statements at that date but does not include all of the information and footnotes required by accounting principles generally accepted in the United States of America for complete financial statements. These financial statements and notes should be read with the financial statements and notes thereto for the year ended December 25, 2004 included in the Company’s annual report on Form 10-K filed with the Securities and Exchange Commission.

Note 2 — Significant Accounting Policies

The Company’s significant accounting policies are disclosed in the Company’s annual report on Form 10-K for the year ended December 25, 2004 filed with the Securities and Exchange Commission. The Company’s significant accounting policies have not changed during the three and nine months ended September 24, 2005.

Note 3 — Inventories

Inventories are stated at the lower of cost (principally standard cost which approximates actual cost on a first-in, first-out basis) or market value. The Company provides inventory provisions based on excess and obsolete inventories determined primarily by future demand forecasts. The provision is measured as the difference between the cost of the inventory and market based upon assumptions about future demand and charged to the provision for inventory, which is a component of cost of sales. At the point of the loss recognition, a new, lower cost basis for that inventory is established, and subsequent changes in facts and circumstances do not result in the restoration or increase in that newly established cost basis.

Inventories consisted of the following (in thousands):


	September 24,		December 25,
	2005		2004
Raw materials	$	5,681	$	4,586
Work-in-progress		8,083		6,174
Finished goods		652		472

	$	14,416	$	11,232

Note 4 — Warranty

The Company offers warranties on certain products and records a liability for the estimated future costs associated with customer claims, which is based upon historical experience and the Company’s estimate of the level of future costs. Warranty costs are reflected in the income statement as a cost of revenues. A reconciliation of the changes in the Company’s warranty liability (included in accrued liabilities) for the three and nine months ended September 24, 2005 follows (in thousands):


	Three Months Ended						Nine Months Ended
	September 24,			September 25,			September 24,			September 25,
	2005			2004			2005			2004
Beginning balance	$	518		$	494		$	560		$	446
Provision for warranties issued during the period		215			180			679			606
Settlements made during the period		(213	)		(180	)		(719	)		(558	)

Ending balance	$	520		$	494		$	520		$	494

FORMFACTOR, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS (Unaudited)

Note 5 — Stock-Based Compensation

The Company uses the intrinsic value method of Accounting Principles Board Opinion No. 25 (“APB No. 25”), “Accounting for Stock Issued to Employees,” in accounting for its employee stock options, and presents disclosure of the pro forma information required under Statement of Financial Accounting Standards No. 123 (“SFAS No. 123”), “Accounting for Stock-Based Compensation” as amended by SFAS No. 148, “Accounting for Stock-Based Compensation — Transition and Disclosure.” The Company uses the Black-Scholes option pricing model to compute its pro forma net income and net income per share.

Had compensation cost for the Company’s stock option grants to employees been determined based on the fair values of the stock option at the date of grant consistent with the provisions of SFAS No. 123, the Company’s net income would have been changed to the pro forma amounts as follows (in thousands, except per share amounts):


	Three Months Ended						Nine Months Ended
	September 24,			September 25,			September 24,			September 25,
	2005			2004			2005			2004
Net income, as reported	$	9,778		$	7,497		$	19,701		$	19,356
Add: Stock-based compensation expense included in reported net income, net of tax		1,029			456			2,085			1,492
Deduct: Total stock-based compensation expense determined under the minimum and fair value based methods for all awards, net of tax		(3,165	)		(2,214	)		(8,249	)		(6,640	)

Pro forma net income	$	7,642		$	5,739		$	13,537		$	14,208

Net income per share:
Basic:
As reported	$	0.25		$	0.20		$	0.50		$	0.52

Pro forma	$	0.19		$	0.15		$	0.34		$	0.38

Diluted:
As reported	$	0.23		$	0.19		$	0.47		$	0.48

Pro forma	$	0.18		$	0.14		$	0.33		$	0.35

The Company has adopted the disclosure only provisions of SFAS No. 123. Prior to the Company’s initial public offering in June 2003, the Company calculated the fair value of each option on the date of grant using the minimum value method as prescribed by SFAS No. 123. Therefore, the pro forma net income and pro forma net income per share may not be representative for future periods. The weighted-average assumptions used are as follows:


	Three Months Ended						Nine Months Ended
	September 24,			September 25,			September 24,			September 25,
	2005			2004			2005			2004
*Stock Options*
Dividend yield		—			—			—			—
Risk-free interest rate		3.86	%		3.50	%		3.82	%		3.46	%
Expected life (in years)		4.5			5			4.5			5
Expected volatility		44.2	%		50	%		47.8	%		46	%
*ESPP*
Dividend yield		—			—			—			—
Risk-free interest rate		3.23	%		1.64	%		3.23	%		1.64	%
Expected life (in years)		1.25			1.25			1.25			1.25
Expected volatility		44.2	%		58	%		47.7	%		58	%

The weighted-average per share grant date fair value of options granted during the three and nine months ended September 24, 2005 was $10.70 and $10.68, and was $8.73 and $8.43 for the three and nine months ended September 25, 2004, respectively. The weighted-average per share estimated fair value of purchase rights granted under the 2002 Employee Stock Purchase Plan was $8.33 for the three and nine months ended September 24, 2005 and $7.74 for the three and nine months ended September 25, 2004.

Note 6 — Net Income per Share

Basic net income per share is computed by dividing net income by the weighted-average number of common shares outstanding for the period. Diluted net income per share is computed giving effect to all potential dilutive common stock, including stock options, warrants, restricted stock and common stock subject to repurchase.

A reconciliation of the numerator and denominator used in the calculation of basic and diluted net income per share follows (in thousands):


	Three Months Ended					Nine Months Ended
	September 24,		September 25,			September 24,			September 25,
	2005		2004			2005			2004
Numerator:
Net income	$	9,778	$	7,497		$	19,701		$	19,356

Denominator:
Weighted-average common stock outstanding		39,733		37,769			39,356			37,691
Less:
Weighted-average shares subject to repurchase		—		(137	)		(13	)		(107	)

Weighted –average shares used in computing basic net income per share		39,733		37,632			39,343			37,584
Dilutive potential common shares used in computing diluted net income per share		2,029		2,867			2,149			2,906

Total weighted-average number of shares used in computing diluted net income per share		41,762		40,499			41,492			40,490

The following outstanding options to purchase common stock and restricted stock were excluded from the computation of diluted net income per share as they had an antidilutive effect (in thousands):


	Three Months Ended				Nine Months Ended
	September 24,		September 25,		September 24,		September 25,
	2005		2004		2005		2004
Options to purchase common stock		305		1,346		553		861
Restricted stock		—		—		13		—

Note 7 — Commitments and Contingencies

Legal Proceedings

From time to time, the Company may be subject to legal proceedings and claims in the ordinary course of business. As of the date of filing this quarterly report, the Company was not involved in any material legal proceedings, other than as set forth below.

In February 2004, the Company filed in the Seoul Southern District Court, located in Seoul, South Korea, two separate complaints against Phicom Corporation, a Korean corporation, alleging infringement of a total of four Korean patents issued to the Company. One complaint alleges that Phicom is infringing the Company’s Korean Patent Nos. 252,457, entitled “Method of Fabricating Interconnections Using Cantilever Elements and Sacrificial Substrates,” and 324,064, entitled “Contact Tip Structures for Microelectronic Interconnection Elements and Methods of Making Same.” The other complaint alleges Phicom is infringing the Company’s Korean Patent Nos. 278,342, entitled “Method of Altering the Orientation of Probe Elements in a Probe Card Assembly,” and 399,210, entitled “Probe Card Assembly.” Both of the complaints seek injunctive relief. The court actions are a part of the Company’s ongoing efforts to protect the intellectual property embodied in its proprietary technology, including its MicroSpring interconnect technology. In March 2004, Phicom filed in the Korean Intellectual Property Office invalidity actions challenging the validity of some or all of the claims of each of the four Company patents at issue in the Seoul infringement actions. The Korean Intellectual Property Office has dismissed Phicom’s challenges against all four of the patents-at-issue. Phicom has appealed the dismissals of the challenges to the Korean Patent Court. On October 27, 2005, the Korean Patent Court issued an oral ruling holding invalid certain claims of two of the Company’s Korean patents. The Company expects the Korean Patent Court to issue a written opinion in one to three weeks following its oral ruling. The Company intends to appeal the ruling of the Korean Patent Court.

On March 4, 2005, the Company filed a patent infringement lawsuit in federal district court in Oregon against Phicom charging that it is willfully infringing four U.S. patents that cover key aspects of the Company’s wafer probe cards. The complaint in this action alleges that Phicom has incorporated the Company’s proprietary technology into its products and seeks both injunctive relief and monetary damages. The U.S. patents identified in the complaint are U.S. Patent No. 5,974,662, entitled “Method of Planarizing Tips of Probe Elements of a Probe Card Assembly’’, U.S. Patent No. 6,246,247, entitled “Probe Card Assembly and Kit, and Methods of Using Same’’, U.S. Patent No. 6,624,648, entitled “Probe Card Assembly’’ and U.S. Patent No. 5,994,152, entitled “Fabricating Interconnects and Tips Using Sacrificial Substrates’’. As of the date of this Quarterly Report, Phicom has confirmed service of the complaint under the Hague Convention on the Service Abroad of Judicial and Extrajudicial Documents in Civil or Commercial

Matters, an international treaty. Phicom has not yet responded on the merits to the Complaint, but has filed a motion with the Oregon federal court asking that the lawsuit be transferred to the U.S. District Court for the Northern District of California, which is where the Company’s principal place of business is located.

The Company could incur material legal expenses with respect to these matters.

Indemnification Obligations

The Company from time to time in the ordinary course of its business enters into contractual arrangements with third parties that include indemnification obligations. Under these contractual arrangements, the Company has agreed to defend, indemnify and hold the third party harmless from and against certain losses. These arrangements may limit the time within which an indemnification claim can be made, the type of the claim and the total amount that the Company can be required to pay in connection with the indemnification obligation. In addition, the Company has entered into indemnification agreements with its directors and officers, and the Company’s bylaws contain indemnification obligations in favor of the Company’s directors, officers and agents. It is not possible to determine or reasonably estimate the maximum potential amount of future payments under these indemnification obligations due to the varying terms of such obligations, the history of prior indemnification claims and the unique facts and circumstances involved in each particular contractual arrangement and in each potential future claim for indemnification. The Company has not had any requests for indemnification under these arrangements. The Company has not recorded any liabilities for these indemnification arrangements on the Company’s condensed consolidated balance sheet as of September 24, 2005.

Note 8 — Stockholders’ Equity

Comprehensive Income (Loss)

Comprehensive income (loss) includes foreign currency translation adjustments and unrealized gains (losses) on marketable securities, the impact of which has been excluded from net income and reflected as a component of stockholders’ equity.

Components of comprehensive income were as follows (in thousands):


	Three Months Ended						Nine Months Ended
	September 24, 2005			September 25, 2004			September 24, 2005		September 25, 2004
Net income	$	9,778		$	7,497		$	19,701	$	19,356
Change in unrealized gain (loss) on marketable securities		207			307			177		(232	)
Foreign currency translation adjustments		(20	)		(15	)		333		(39	)

Comprehensive income	$	9,965		$	7,789		$	20,211	$	19,085

Components of accumulated other comprehensive loss were as follows (in thousands):


	September 24, 2005			December 25, 2004
Unrealized loss on marketable securities	$	(271	)	$	(448	)
Foreign currency translation adjustments		51			(282	)

Accumulated other comprehensive loss	$	(220	)	$	(730	)

Note 9 — Derivative Financial Instruments

The Company purchases forward exchange contracts to hedge certain existing foreign currency denominated accounts receivable. These hedges do not qualify for hedge accounting treatment per the provisions of Statement of Financial Accounting Standards No. 133, “Accounting for Derivative Instruments and Hedging Activities.” The Company recognizes changes in the fair value of these foreign exchange contracts in other income and expense, net. The Company does not use derivative financial instruments for trading or speculative purposes.

As of September 24, 2005, the Company had two forward exchange contracts outstanding to sell 158.7 million Yen for $1.4 million with a contract rate of 112.2 Yen per U.S. dollar. These contracts will become due in October and November of 2005.

Note 10 — Recent Accounting Pronouncements

In November 2004, the Financial Accounting Standards Board (FASB) issued SFAS No. 151, “Inventory Costs, an amendment of ARB No. 43, Chapter 4,” (“SFAS No. 151”) to clarify the accounting for abnormal amounts of idle facility expense, freight, handling costs and spoilage. SFAS No. 151 requires that these costs be recognized as current-period charges. In addition, this Statement requires that allocation of fixed production overheads be based on the normal capacity of the production facilities. SFAS No. 151 is effective for inventory costs incurred during fiscal years beginning after June 15, 2005. The adoption of SFAS No. 151 will not have a material effect on the Company’s consolidated financial statements because its inventory accounting policies are consistent with the requirements of this Statement.

In December 2004, the FASB issues SFAS No. 153, Exchange of Nonmonetary Assets, an amendment of APB No. 29, Accounting for Nonmonetary Transactions (“SFAS No. 153”). SFAS No. 153 amends APB No. 29 to eliminate the exception for nonmonetary exchanges of similar productive assets and replaces it with a general exception for exchanges of nonmonetary assets that do not have commercial substance. A nonmonetary exchange has commercial substance, if the future cash flows of the entity are expected to change significantly as a result of the exchange. The Company is required to adopt SFAS No. 153, on a prospective basis, for nonmonetary exchanges beginning after June 15, 2005. The adoption of SFAS 153 did not have an impact on the Company’s consolidated result of operations.

In December 2004, the FASB issued SFAS No. 123(R), “Share-Based Payment.” SFAS No. 123(R) requires employee stock options and rights to purchase shares under stock participation plans to be accounted for under the fair value method, and eliminates the ability to account for these instruments under the intrinsic value method prescribed by APB Opinion No. 25, and allowed under the original provisions of SFAS No. 123. SFAS No. 123(R) requires the use of an option pricing model for estimating fair value, which is amortized to expense over the service periods. SFAS No. 123(R) allows for either prospective recognition of compensation expense or retrospective recognition, which may be back to the original issuance of SFAS No. 123 or only to interim periods in the year of adoption.

SFAS No. 123(R) also requires the benefits of tax deductions in excess of recognized compensation expense to be reported as a financing cash flow, rather than as an operating cash flow as prescribed under current accounting rules. This requirement will reduce net operating cash flows and increase net financing cash flows in periods after adoption. Total cash flow will remain unchanged from as it would have been reported under prior accounting rules.

As permitted by SFAS No. 123, the Company currently accounts for share-based payments to employees using APB Opinion No. 25’s intrinsic value method. As a consequence, the Company generally recognizes no compensation cost for employee stock options and purchases under its Employee Stock Purchase Plan. Although the adoption of SFAS 123(R)’s fair value method will have no adverse impact on the Company’s balance sheet or total cash flows, it will affect its net income and diluted earnings per share. The actual effects of adopting SFAS 123(R) will depend on numerous factors including the amounts of share-based payments granted in the future, the valuation model the Company uses to value future share-based payments to employees and estimated forfeiture rates.

On April 14, 2005, the Securities and Exchange Commission announced that the effective date of SFAS No. 123(R) will be extended to annual periods beginning after June 15, 2005. The Company expects to adopt this new standard on January 1, 2006, using the modified prospective method. Management believes that the adoption of SFAS No. 123(R) will have a material impact on net income and net income per share.

In March 2005, the FASB issued FASB Interpretation No. 47 (“FIN 47”), “Accounting for Conditional Asset Retirement Obligations.” FIN 47 clarifies that the term conditional asset retirement obligation as used in FASB Statement No. 143, “Accounting for Asset Retirement Obligations”, refers to a legal obligation to perform an asset retirement activity in which the timing and (or) method of settlement are conditional on a future event that may or may not be within the control of the entity. The obligation to perform the asset retirement activity is unconditional even though uncertainty exists about the timing and (or) method of settlement. Uncertainty about the timing and (or) method of settlement of a conditional asset retirement obligation should be factored into the measurement of the liability when sufficient information exists. FIN 47 also clarifies when an entity would have sufficient information to reasonably estimate the fair value of an asset retirement obligation. The Company is currently evaluating what impact, if any, this statement will have on its financial statements.

Note 11 — Subsequent Events:

On October 27, 2005, the Korean Patent Court issued an oral ruling holding invalid certain claims of two of the Company’s Korean patents. The two Korean patents affected by the ruling are Nos. 278,342, entitled “Method of Altering the Orientation of Probe Elements in a Probe Card Assembly,” and 399,210, entitled “Probe Card Assembly.” The Company had filed in the Seoul Southern District Court, located in Seoul, South Korea, two separate complaints against Phicom Corporation, a Korean corporation, alleging infringement of a total of four of the Company’s Korean patents, including the above-referenced patents, in February 2004. The October 27 oral decision does not affect the other two Korean patents, Korean Patent NOS. 252,457, entitled “Method of Fabricating Interconnections Using Cantilever Elements and Sacrificial Substrates,” and 324,064, entitled “Contact Tip Structures for Microelectronic Interconnection Elements and Methods of Making Same,” which the Company is asserting against Phicom Corporation. The October 27 oral decision does not affect the Company’s US patents. In March 2004, Phicom filed in the Korean Intellectual Property Office invalidity actions challenging the validity of some or all of the claims of each of the four Company patents at issue in the Seoul infringement actions. The Korean Intellectual Property Office dismissed Phicom’s challenges against all four patents. Phicom appealed the dismissals of the challenges to the Korean Patent Court, which held invalid certain claims of the above-referenced patents on October 27^th. The Company expects the Korean Patent Court to issue a written opinion in one to three weeks following its oral ruling. The Company intends to appeal the ruling of the Korean Patent Court.

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Cautionary Statement Regarding Forward-Looking Statements

This quarterly report on Form 10-Q contains forward-looking statements within the meaning of the Securities Exchange Act of 1934 and the Securities Act of 1933, which are subject to risks, uncertainties and assumptions that are difficult to predict. The forward-looking statements include statements concerning, among other things, our business strategy, including anticipated trends and developments in and management plans for our business and the markets in which we operate, financial results, operating results, revenues, gross margin, operating expenses, products, projected costs and capital expenditures, research and development programs, sales and marketing initiatives, and competition. In some cases, you can identify these statements by forward-looking words such as “may,” “might,” “will,” “could,” “should,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “intend” and “continue,” the negative or plural of these words and other comparable terminology.

The forward-looking statements are only predictions based on our current expectations and our projections about future events. All forward-looking statements included in this quarterly report are based upon information available to us as of the filing date of this quarterly report. You should not place undue reliance on these forward-looking statements. We undertake no obligation to update any of these statements for any reason. These forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievements to differ materially from those expressed or implied by these statements. These factors include the matters discussed in the section titled “Risks That May Affect Future Results” and elsewhere in this quarterly report. You should carefully consider the numerous risks and uncertainties described under “Risks That May Affect Future Results.”

The following discussion and analysis should be read in conjunction with our condensed consolidated financial statements and the accompanying notes contained in this quarterly report. Unless expressly stated or the context otherwise requires, the terms “we,” “our,” “us”, “the Company” and “FormFactor” refer to FormFactor, Inc. and its subsidiaries.

Overview

We design, develop, manufacture, sell and support precision, high performance advanced semiconductor wafer probe cards. Semiconductor manufacturers use our wafer probe cards to perform wafer probe test on die on the whole semiconductor wafer, prior to singulation, in the front end of the semiconductor manufacturing process. After the fabrication of a semiconductor wafer, the chips on the wafer are subject to wafer probe test. During wafer probe test, a wafer probe card is mounted in a prober, which is in turn connected to a semiconductor tester, and the wafer probe card is used as an interface to connect electronically with and test individual chips on a wafer. At the core of our product offering are our proprietary technologies, including our MicroSpring interconnect technology and design processes. Our MicroSpring interconnect technology includes a resilient contact element manufactured at our production facilities in Livermore, California. To date, we have derived our revenues primarily from the sale of wafer probe cards incorporating our MicroSpring interconnect technology.

We work closely with our customers to design, develop and manufacture custom wafer probe cards. Each wafer probe card is a custom product that is specific to the chip and wafer designs of the customer. As a result, our revenue growth is driven by the number of new semiconductor designs, technology transitions and increased semiconductor production volumes.

Revenues. Wafer probe card sales comprise substantially all of our revenues. Revenues have increased due to increased demand for our existing products, newly introduced products and new application for markets we had not previously penetrated. Revenues from our customers are subject to both quarterly and annual fluctuations due to a number of factors, including design cycles, technology adoption rates and cyclicality of the different end markets into which our customers’ products are sold. We expect that revenues from the sale of wafer probe cards will continue to account for substantially all of our revenues for the foreseeable future.

Cost of Revenues. Cost of revenues consists primarily of manufacturing materials, payroll and manufacturing-related overhead. In addition, cost of revenues also includes costs related to the start up of our new manufacturing facility and excess and obsolete inventory provisions. Our manufacturing operations rely upon a limited number of suppliers to provide key components and materials for our products, some of which are a sole source. We order materials and supplies based on backlog and non-binding forecasted customer orders. Tooling and setup costs related to changing manufacturing lots at our suppliers are also included in the cost of revenues. We expense all warranty costs and inventory provisions as cost of revenues.

We design, manufacture and sell a fully custom product into the semiconductor test market that is subject to significant cyclicality and demand fluctuations. Our advanced wafer probe cards are complex products that are custom to a specific chip design and must be delivered on relatively short lead-times as compared to our overall manufacturing process. Probe cards are manufactured in low volumes; therefore, raw material purchases are often subject to minimum purchase order quantities in excess of actual demand. It is

therefore not uncommon for the Company to acquire production materials and start production activities in advance of the Company’s receipt of an actual purchase order. Consequently, inventory reserve can result from a change in forecasted demand. We record inventory reserve for estimated obsolete and non saleable inventories equal to the difference between the cost of inventories and the estimated market value based upon assumptions about future demand and market conditions. If actual market conditions are less favorable than those projected by management, additional inventory reserve would be required. Once established, the original cost of our inventory less the related inventory reserve represents the new cost basis of such products. Reversal of these reserves is recognized only when the related inventory has been scrapped or sold.

Research and Development. Research and development expenses include expenses related to product development, engineering and material costs. All research and development costs are expensed as incurred. We continue to invest a significant amount in research and development activities to develop new technologies for current and new markets and new applications in the future. We expect these expenses to scale with revenue growth in the 12 to 14% of revenue range.

Selling, General and Administrative. Selling, general and administrative expenses include expenses related to sales, marketing, and administrative personnel, internal and outside sales representatives’ commissions, market research and consulting, and other marketing, sales and administrative activities, including litigation costs enforcing our patent rights and compliance costs. We expect that selling expenses will increase as revenues increase, and we expect that general and administrative expenses will increase in absolute dollars to support future revenue growth.

Stock-Based Compensation. In connection with the grant of stock options to employees in fiscal 2001 and fiscal 2002, and in fiscal 2003 through our initial public offering in June 2003, we recorded an aggregate of $14.3 million in deferred stock-based compensation. These options are considered compensatory because the fair value of our stock determined for financial reporting purposes is greater than the fair value determined on the date of the grant. In addition, we recorded an aggregate of $1.4 million in deferred stock-based compensation in fiscal 2004 and the three months ended March 26, 2005 related to the issuance of restricted stock. As of September 24, 2005, we had an aggregate of $3.2 million of deferred stock-based compensation remaining to be amortized. This deferred stock-based compensation balance would be amortized, absent adoption of SFAS No. 123(R), as follows: $553,000 during the remainder of fiscal 2005; $1.5 million during fiscal 2006; $763,000 during fiscal 2007; and $326,000 during fiscal 2008. We are amortizing the deferred stock-based compensation on a straight line basis over the vesting period of the related options, which is generally four to five years. For options granted to employees to date, the amount of stock-based compensation amortization to be recognized in future periods could decrease if options for which deferred but unvested compensation has been recorded are forfeited.

Use of Estimates. Our discussion and analysis of our financial condition and results of operations are based upon our unaudited condensed consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amount of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to uncollectible receivables, inventories, marketable securities, intangible assets, income taxes, warranty obligations, excess component and order cancellation costs, and contingencies and litigation. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources.

Results of Operations

The following table sets forth our operating results as a percentage of revenues for the periods indicated:


	Three Months Ended						Nine Months Ended
	September 24, 2005			September 25, 2004			September 24, 2005			September 25, 2004
Revenues		100.0	%		100.0	%		100.0	%		100.0	%
Cost of revenues		54.5			49.6			56.2			48.4
Stock-based compensation		0.2			0.3			0.2			0.4

Gross margin		45.3			50.1			43.6			51.2
Operating expenses:
Research and development		12.3			10.8			11.4			11.0
Selling, general and administrative		17.1			15.4			17.7			15.7
Stock-based compensation		2.2			0.9			1.6			1.2

Total operating expenses		31.6			27.1			30.7			27.9

Operating income		13.7			23.0			12.9			23.3
Interest income		1.8			1.2			1.8			1.3
Other income (expense), net		(1.0	)		(0.3	)		(0.4	)		(0.6	)

		0.8			0.9			1.4			0.7

Income before income taxes		14.5			23.9			14.3			24.0
Benefit from (provision for) income taxes		1.2			(9.4	)		(2.4	)		(9.5	)

Net income		15.7	%		14.5	%		11.9			14.5	%

Three Months Ended September 24, 2005 and September 25, 2004

Revenues. Revenues for the three months ended September 24, 2005 were $62.4 million compared with $51.4 million for the three months ended September 25, 2004, an increase of $11.0 million, or 21.4%. The $11.0 million increase was due primarily to an increase of $12.7 million in revenues from DRAM manufacturers and an increase of $2.9 million from sales to logic manufacturers, offset in part by a reduction of $3.9 million in revenues generated from sales to manufacturers of flash memory devices and a reduction in other revenues of $724,000. Revenues continued to grow as semiconductor manufacturers continued to replace conventional probe cards with advanced wafer test technologies. The build out of 300mm wafer production capacity brought additional demand for wafer probe cards as part of our customers’ overall capacity expansion. New applications like mobile RAM, the transition to 90 nanometer technologies, as well as the transition to DDR II contributed to the overall growth in revenues.

The majority of revenues for the three months ended September 24, 2005 were generated by sales of wafer probe cards to manufacturers of DRAM devices. Sales of wafer probe cards to test DRAM devices accounted for $47.3 million, or 75.8% of revenues, for the quarter ended September 24, 2005 compared to $34.6 million, or 67.3% of revenues, for the quarter ended September 25, 2004. The increase was primarily due to the continued execution of major DRAM transitions to 90 nanometer technology and below, DDR II architecture and the proliferation of Mobile RAM applications.

Revenues generated from sales to flash memory device manufacturers decreased from $12.7 million for the three months ended September 25, 2004 to $8.7 million for the three months ended September 24, 2005. The decrease was driven by lower demand for NAND flash applications.

Revenues from manufacturers of logic devices increased to $6.4 million for the three months ended September 24, 2005 from $3.4 million for the three months ended September 25, 2004. The increase was primarily driven by demand for high parallelism test products.

Revenues by geographic region for the three months ended September 24, 2005 as a percentage of revenues were 40.7% in North America, 8.9% in Europe, 30.6% in Japan and 19.8% in Asia Pacific. Revenues by geographic region for the three months ended September 25, 2004 as a percentage of revenues were 33.1% in North America, 19.4% in Europe, 21.6% in Japan and 25.9% in Asia Pacific. Geographic revenue information for the three months ended September 24, 2005 and September 25, 2004 is based on the invoicing location of the customer. For example, certain Korean customers purchase through their North American subsidiaries.

The following customers accounted for more than 10% of our revenues for the three months ended September 24, 2005 or September 25, 2004:


	Three Months Ended
	September 24, 2005			September 25, 2004
Spirox Corporation		18.6	%		20.9	%
Samsung		19.9			*
Elpida		29.0			15.4
Intel Corporation		12.6			12.4
Infineon Technologies AG		*			16.3


*		Less than 10% of revenues.

Gross Margin. Gross margin as a percentage of revenues was 45.3% for the three months ended September 24, 2005 compared with 50.1% for the three months ended September 25, 2004. The decrease in gross margin percentage was primarily due to start up costs related to our new factory, costs to ramp our new factory to a higher revenue capacity and higher provision for excess inventory. During the three months ended September 24, 2005 and September 25, 2004 we incurred $2.3 million and $1.2 million, respectively, of start up expenses related to the bring up of our new manufacturing facility, which represented 3.7% and 2.4% of revenues, respectively. The increase in the inventory provision by $3.2 million, or 5.1% of revenues for the three months ended September 24, 2005 compared with $1.4 million, or 2.8% of revenues for the three months ended September 25, 2004 was primarily due to excess custom inventory quantities. As our advanced wafer probe cards are manufactured in low volumes and must be delivered on relatively short lead-times, it is not uncommon for us to acquire production materials and start certain production activities based on estimated production yields and forecasted demand prior to or in excess of actual demand for our wafer probe cards.

Research and Development. Research and development expenses, excluding stock-based compensation charges, increased to $7.7 million, or 12.3% of revenues, for the three months ended September 24, 2005 compared to $5.6 million, or 10.8% of revenues, for the three months ended September 25, 2004. The increase in absolute dollars was mainly due to an increase of approximately $550,000 in personnel costs and an increase of approximately $1.4 million in development program related costs. Stock-based compensation expense for the three months ended September 24, 2005 was $181,000 compared with $216,000 for the three months ended September 25, 2004. Through the three month period ended September 24, 2005, we continued the development of our next generation parallelism architecture and products, fine pitch memory and logic products, advanced MicroSpring interconnect technology and new process technologies. We are also making incremental investments in new technologies and products as we focus on new market opportunities.

Selling, General and Administrative. Selling, general and administrative expenses, excluding stock-based compensation charges, were $10.7 million for the three months ended September 24, 2005, or 17.1% of revenues, compared to $7.9 million, or 15.4% of revenues, for the three months ended September 25, 2004. The increase in absolute dollars was mainly due to an increase of approximately $2.0 million in personnel related expenses and an increase of approximately $707,000 in outside professional services that primarily related to patent litigation and other consulting services, including compliance with the Sarbanes-Oxley Act. Stock-based compensation expense for the three months ended September 24, 2005 increased to $1.2 million from $239,000 for the three months ended September 25, 2004 primarily due to the acceleration of options related to the departure of our chief operating officer.

Interest Income and Other Expense, Net. Interest income for the three months ended September 24, 2005 was $1.1 million compared with $635,000 for the three months ended September 25, 2004. The increase was primarily due to a larger cash, cash equivalents and marketable securities balance throughout the three months ended September 24, 2005. Other expense, net was $630,000 and $156,000 for the three months ended September 24, 2005 and September 25, 2004, respectively. Other expense was comprised mainly of foreign currency losses.

Provision for Income Taxes. Benefit from income taxes was $758,000 for the three months ended September 24, 2005 compared with a provision for income taxes of $4.8 million for the three months ended September 25, 2004. The $758,000 tax benefit for the three months ended September 24, 2005 reflected the impact of certain discrete transactions recorded in the third quarter of 2005, mainly adjustments of $3.0 million related to a research and development tax credit study as well as the release of prior year tax reserves with respect to years for which the statute of limitations had been reached. The normalized effective tax rate for the three months ended September 24, 2005 was 29.2% compared with 39.2% for the three months ended September 25, 2004. The decrease in the normalized effective tax rate was mainly due to the increase of estimated research and development tax credits and an increase of tax exempt interest income.

Nine Months Ended September 24, 2005 and September 25, 2004

Revenues. Revenues for the nine months ended September 24, 2005 were $165.7 million compared with $131.6 million for the nine months ended September 25, 2004, an increase of $34.1 million, or 25.9%. The $34.1 million increase was due primarily to an increase of $37.0 million in revenues from DRAM manufacturers and an increase of $2.5 million from sales to logic manufacturers, offset in part by a reduction of $4.1 million in revenues generated from sales to manufacturers of flash memory devices and a decrease of $1.3 million in other revenues. Revenues continued to grow as semiconductor manufacturers continued to replace conventional probe cards with advanced wafer test technologies and more test was performed at the wafer level. The build out of 300mm wafer production capacity and the transition to 90 nanometer technologies, to DDR II architecture and 512 megabit density contributed to the overall growth in revenues.

The majority of revenues for the nine months ended September 24, 2005 were generated by sales of wafer probe cards to manufacturers of DRAM devices. Sales of wafer probe cards to test DRAM devices accounted for $127.8 million, or 77.1% of revenues, for the nine months ended September 24, 2005 compared to $90.9 million, or 69.1% of revenues, for the nine months ended September 25, 2004. The increase was primarily due to the continued execution of major DRAM transitions to 90 nanometer technology, DDR II architecture and the proliferation of Mobile RAM applications.

Revenues generated from sales to flash memory device manufacturers decreased from $27.6 million for the nine months ended September 25, 2004 to $23.5 million for the nine months ended September 24, 2005. The decrease was driven by lower demand for NOR and NAND flash applications.

Revenues from manufacturers of logic devices increased to $14.0 million for the nine months ended September 24, 2005 from $11.5 million for the nine months ended September 25, 2004. The increase was primarily driven by demand for high parallelism test products and a number of significant design wins achieved in the third quarter of 2005.

Revenues by geographic region for the nine months ended September 24, 2005 as a percentage of revenues were 36.5% in North America, 10.2% in Europe, 21.6% in Japan and 31.7% in Asia Pacific. Revenues by geographic region for the nine months ended September 25, 2004 as a percentage of revenues were 38.4% in North America, 13.3% in Europe, 27.9% in Japan and 20.4% in Asia Pacific. Geographic revenue information for the nine months ended September 24, 2005 and September 25, 2004 is based on the invoicing location of the customer. For example, certain Korean customers purchase through their North American subsidiaries.

The following customers accounted for more than 10% of our revenues for the nine months ended September 24, 2005 or September 25, 2004:


	Nine Months Ended
	September 24, 2005			September 25, 2004
Spirox Corporation		25.7	%		17.2	%
Samsung		18.4			*
Elpida		18.4			20.7
Intel Corporation		10.7			14.9
Infineon Technologies AG		*			11.2


*		Less than 10% of revenues.

Gross Margin. Gross margin as a percentage of revenues was 43.6% for the nine months ended September 24, 2005 compared with 51.3% for the nine months ended September 25, 2004. The decrease in gross margin percentage was primarily due to start up costs related to our new factory and higher provision for excess inventory. During the nine months ended September 24, 2005 and September 25, 2004 we incurred $11.5 million and $2.1 million, respectively, of start up expenses related to the bring up of our new manufacturing facility, which represented 6.9% and 1.6% of revenues, respectively. The increase in inventory provision by $8.1 million, or 4.9% of revenues for the nine months ended September 24, 2005 compared with $2.8 million, or 2.1% of revenues for the nine months ended September 25, 2004 was primarily due to excess custom inventory quantities. As our advanced wafer probe cards are manufactured in low volumes and must be delivered on relatively short lead-times, it is not uncommon for us to acquire production materials and start certain production activities based on estimated production yields and forecasted demand prior to or in excess of actual demand for our wafer probe cards.

Research and Development. Research and development expenses, excluding stock-based compensation charges, increased to $18.9 million, or 11.4% of revenues, for the nine months ended September 24, 2005 compared to $14.4 million, or 11.0% of revenues, for the nine months ended September 25, 2004. The increase in absolute dollars was mainly due to an increase of approximately $1.8 million in personnel costs, an increase of approximately $1.9 million in development program related costs and an increase of approximately $816,000 in facility costs related to our advanced development laboratory. Stock-based compensation expense for the nine months ended September 24, 2005 was $577,000 compared with $606,000 for the nine months ended September 25, 2004. Through the nine month period ended September 24, 2005, we continued the development of our next generation parallelism architecture and products, fine pitch memory and logic products, advanced MicroSpring interconnect technology and new process technologies. We are also making incremental investments in new technologies and products as we focus on new market opportunities.

Selling, General and Administrative. Selling, general and administrative expenses, excluding stock-based compensation charges, were $29.2 million for the nine months ended September 24, 2005, or 17.7% of revenues, compared to $20.6 million, or 15.7% of revenues, for the nine months ended September 25, 2004. The increase in absolute dollars was mainly due to an increase of approximately $4.4 million in personnel related expenses, an increase of approximately $2.7 million in outside professional services that primarily related to patent litigation and compliance with the Sarbanes-Oxley Act, an increase of approximately $380,000 in commissions to our sales representatives and an increase of approximately $1.0 million in facility cost. Stock-based compensation expense for the nine months ended September 24, 2005 increased to $2.1 million from $965,000 for the nine months ended September 25, 2004 primarily due to the acceleration of options related to the departure of our chief operating officer.

Interest Income and Other Expense, Net. Interest income for the nine months ended September 24, 2005 was $2.9 million compared with $1.7 million for the nine months ended September 25, 2004. The increase was primarily due to a larger cash, cash equivalents and marketable securities balance throughout the nine month period ended September 24, 2005, as well as higher interest rates. Other expense was $655,000 and $798,000 for the nine months ended September 24, 2005 and September 25, 2004, respectively. Other expense was comprised of mainly foreign currency gains or losses.

Provision for Income Taxes. Provision for income taxes was $4.0 million for the nine months ended September 24, 2005 compared with $12.5 million for the nine months ended September 25, 2004. Our effective tax rate was 19.9% for the first nine months of 2005, compared to 39.2% of the first nine months of 2004. The decrease in the effective tax rate was primarily due to adjustments related to a research and development tax credit study as well as the release of prior year tax reserves with respect to years for which the statute of limitations had been reached. We expect our tax rate for fiscal 2006 to increase to the 33 to 35% range as earnings increase.

Critical Accounting Policies and Estimates

For a description of the critical accounting policies that affect our more significant judgments and estimates used in the preparation of our condensed consolidated financial statements, refer to our Annual Report on Form 10-K filed with the Securities and Exchange Commission. There have been no changes to our critical accounting policies since December 25, 2004.

Liquidity and Capital Resources

As of September 24, 2005, we had $203.8 million in cash, cash equivalents, marketable securities and restricted cash, compared with $193.7 million as of December 25, 2004.

Net cash provided by operating activities was $22.1 million for the nine months ended September 24, 2005 compared with $17.7 million for the nine months ended September 25, 2004. Net cash provided by operating activities for the nine months ended September 24, 2005 resulted primarily from net income as the impact of non-cash items that were recorded on the statements of income, primarily depreciation and amortization expense and the provision for excess and obsolete inventories, were offset by investments in accounts receivable and inventories to support growth.

Accounts receivable increased by $10.4 million for the nine months ended September 24, 2005 and $13.9 million for the nine months ended September 25, 2004, due to an increase in worldwide sales. Our days sales outstanding from receivables (DSO) decreased from 50 days at December 25, 2004 to 43 days at September 24, 2005 as a result of a larger portion of our sales going to customers with shorter payment terms.

Inventories, net increased by $3.2 million for the nine months ended September 24, 2005 and increased by $2.0 million for the nine months ended September 25, 2004 due to an increase in work-in-process to support revenue growth. Net inventory turns for the nine months ended September 24, 2005 have increased to 9.7 turns compared with 9.3 turns for the fiscal year ended December 25, 2004. Inventory reserve as a percentage of gross inventories increased to 54.7% at September 24, 2005 from 53.4% at December 25, 2004.

Accrued liabilities increased by $5.6 million and $5.0 million for the nine months ended September 24, 2005 and the nine months ended September 25, 2004, respectively, primarily due to accrued income taxes.

Net cash used in investing activities was $43.9 million for the nine months ended September 24, 2005 compared with $13.1 million for the nine months ended September 25, 2004. Net cash used in investing activities resulted primarily from the purchase of marketable securities offset by the maturity of marketable securities in each of these periods. Capital expenditures were $26.7 million for the nine months ended September 24, 2005 and $31.1 million for the nine months ended September 25, 2004, of which $21.3 million and $23.4 million were paid in cash, respectively. Capital expenditures for those periods related primarily to our investment in our new manufacturing facility.

Net cash provided by financing activities was $10.6 million for the nine months ended September 24, 2005, compared to $8.6 million for the nine months ended September 25, 2004. Net cash provided by financing activities for each of these periods was mainly due to proceeds from the issuance of common stock under employee stock plans.

In May 2001, we signed a ten-year lease for an additional 119,000 square feet of manufacturing, research and development and office space. In October 2004, we signed a ten-year lease for an additional 12,000 square feet of research and development space. The remaining rent obligation over the term of the lease is $18.8 million and is accounted for as an operating lease.

We believe that cash generated from operations, together with the liquidity provided by our existing cash, cash equivalents and marketable securities will be sufficient to meet our anticipated cash needs for at least the next 12 months. Although we are currently not a party to any agreement or letter of intent with respect to potential investments in, or acquisitions of, complementary businesses, products or technologies, we may enter into these types of arrangements in the future, which could require us to seek additional equity or debt financing. Additional funds may not be available on terms favorable to us or at all.

Off-Balance Sheet Arrangements

As part of our ongoing business, we do not participate in transactions that generate relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, or SPEs, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. As of September 24, 2005, we were not involved in any unconsolidated SPE transactions.

Recent Accounting Pronouncements

In November 2004, the Financial Accounting Standards Board (FASB) issued SFAS No. 151, “Inventory Costs, an amendment of ARB No. 43, Chapter 4,” (“SFAS No. 151”) to clarify the accounting for abnormal amounts of idle facility expense, freight, handling costs and spoilage. SFAS No. 151 requires that these costs be recognized as current-period charges. In addition, this Statement requires that allocation of fixed production overheads be based on the normal capacity of the production facilities. SFAS No. 151 is effective for inventory costs incurred during fiscal years beginning after June 15, 2005. The adoption of SFAS No. 151 will not have a material effect on our consolidated financial statements because our inventory accounting policies are consistent with the requirements of this Statement.

In December 2004, the FASB issues SFAS No. 153, Exchange of Nonmonetary Assets, an amendment of APB No. 29, Accounting for Nonmonetary Transactions (“SFAS No. 153”). SFAS No. 153 amends APB No. 29 to eliminate the exception for nonmonetary exchanges of similar productive assets and replaces it with a general exception for exchanges of nonmonetary assets that do not have commercial substance. A nonmonetary exchange has commercial substance, if the future cash flows of the entity are expected to change significantly as a result of the exchange. We are required to adopt SFAS No. 153, on a prospective basis, for nonmonetary exchanges beginning after June 15, 2005. The adoption of SFAS No. 153 did not have an impact on our consolidated result of operations.

SFAS 123(R) also requires the benefits of tax deductions in excess of recognized compensation expense to be reported as a financing cash flow, rather than as an operating cash flow as prescribed under current accounting rules. This requirement will reduce net operating cash flows and increase net financing cash flows in periods after adoption. Total cash flow will remain unchanged from cash flow as it would have been reported under prior accounting rules.

As permitted by SFAS 123, the Company currently accounts for share-based payments to employees using APB Opinion 25’s intrinsic value method. As a consequence, we generally recognize no compensation cost for employee stock options and purchases under our Employee Stock Purchase Plan. Although the adoption of SFAS 123(R)’s fair value method will have no adverse impact on our balance sheet or total cash flows, it will affect our net income and diluted earnings per share. The actual effects of adopting SFAS 123(R) will depend on numerous factors including the amounts of share-based payments granted in the future, the valuation model we use to value future share-based payments to employees and estimated forfeiture rates.

On April 14, 2005, the Securities and Exchange Commission announced that the effective date of SFAS No. 123(R) will be extended to annual periods beginning after June 15, 2005. We expect to adopt this new standard on January 1, 2006, using the modified prospective method. We believe that the adoption of SFAS No. 123(R) will have a material impact on net income and net income per share.

In March 2005, the FASB issued FASB Interpretation No. 47 (“FIN 47”), “Accounting for Conditional Asset Retirement Obligations.” FIN 47 clarifies that the term conditional asset retirement obligation as used in FASB Statement No. 143, “Accounting for Asset Retirement Obligations”, refers to a legal obligation to perform an asset retirement activity in which the timing and (or) method of settlement are conditional on a future event that may or may not be within the control of the entity. The obligation to perform the asset retirement activity is unconditional even though uncertainty exists about the timing and (or) method of settlement. Uncertainty about the timing and (or) method of settlement of a conditional asset retirement obligation should be factored into the measurement of the liability when sufficient information exists. FIN 47 also clarifies when an entity would have sufficient information to reasonably estimate the fair value of an asset retirement obligation. We are currently evaluating what impact, if any, this statement will have on our financial statements.

Risks That May Affect Future Results

You should carefully consider the following risk factors, as well as the other information in this Quarterly Report on Form 10-Q, in evaluating FormFactor and our business. If any of the following risks actually occur, our business, financial condition and results of operations would suffer. Accordingly, the trading price of our common stock would likely decline and you may lose all or part of your investment in our common stock. The risks and uncertainties described below are not the only ones we face. Additional risks that we currently do not know about or that we currently believe to be immaterial may also impair our business operations.

Our operating results are likely to fluctuate, which could cause us to miss expectations about these results and cause the trading price of our common stock to decline.

Our operating results are likely to fluctuate. As a result, we believe you should not rely on period-to-period comparisons of our financial results as indicators of our future performance. Some of the important factors that could cause our revenues and operating results to fluctuate from period-to-period include:

•		customer demand for our products;

•		our ability to deliver reliable, cost-effective products in a timely manner;

•		the reduction, rescheduling or cancellation of orders by our customers;

•		the timing and success of new product introductions and new technologies by our competitors and us;

•		our product and customer sales mix and geographical sales mix;

•		changes in the level of our operating expenses needed to support our anticipated growth;

•		a reduction in the price or the profitability of our products;

•		changes in our production capacity or the availability or the cost of components and materials;

•		our ability to bring new products into volume production efficiently;

•		our ability to add manufacturing capacity and to stabilize production yields and ramp production volume;

•		our ability to efficiently bring up our new manufacturing facility;

•		our relationships with customers and companies that manufacture semiconductor test equipment,

•		the timing of and return on our investments in research and development;

•		our ability to collect accounts receivable;

•		seasonality, principally due to our customers’ purchasing cycles; and

•		market conditions in our industry, the semiconductor industry and the economy as a whole.

The occurrence of one or more of these factors might cause our operating results to vary widely. For example, earlier in 2005, we announced that, due to contamination in our manufacturing process that affected our ability to timely ship product, our revenues in the fourth quarter of fiscal 2004 were below our previous guidance and declined relative to the third quarter of fiscal 2004. If our revenues or operating results fall below the expectations of market analysts or investors, the market price of our common stock could decline substantially.

Cyclicality in the semiconductor industry historically has affected our sales and might do so in the future, and as a result we could experience reduced revenues or operating results.

The semiconductor industry has historically been cyclical and is characterized by wide fluctuations in product supply and demand. From time to time, this industry has experienced significant downturns, often in connection with, or in anticipation of, maturing product and technology cycles, excess inventories and declines in general economic conditions. This cyclicality could cause our operating results to decline dramatically from one period to the next. For example, our revenues in the three months ended September 29, 2001 declined by 25.5% compared to our revenues in the three months ended June 30, 2001, and our revenues in the three months ended March 29, 2003 declined by 15.7% compared to our revenues in the three months ended December 28, 2002. Our business depends heavily upon the development of new semiconductors and semiconductor designs, the volume of production by semiconductor manufacturers and the overall financial strength of our customers, which, in turn, depend upon the current and anticipated market demand for semiconductors and products, such as personal computers, that use semiconductors. Semiconductor manufacturers generally sharply curtail their spending during industry downturns and historically have lowered their spending disproportionately more than the decline in their revenues. As a result, if we are unable to adjust our levels of manufacturing and human resources or manage our costs and deliveries from suppliers in response to lower spending by semiconductor manufacturers, our gross margin might decline and cause us to experience operating losses.

If we are unable to manufacture our products efficiently, our operating results could suffer.

We must continuously modify our manufacturing processes in an effort to improve yields and product performance, lower our costs and reduce the time it takes us to design and produce our products. We also may be subject to events that negatively affect our manufacturing processes and impact our business and operating results. For example, during our fiscal quarter ended December 25, 2004, we experienced a contamination problem in our manufacturing line. This contamination problem caused a yield decline that, in turn, resulted in our inability to timely ship products to our customers. We have incurred substantial costs, and may incur additional substantial costs in connection with the capacity ramp at our new manufacturing facility with respect to the implementation of new manufacturing technologies, methods and processes and the purchase of new equipment, which could negatively impact our gross margin. Similar start up costs and negative impact may occur as we modify our manufacturing processes, as may be required. We could experience manufacturing delays and inefficiencies as we endeavor to complete the transition to our new manufacturing facility, and when we refine new manufacturing technologies, methods and processes, implement them in volume production and qualify them with customers, which could cause our operating results to decline. The risk of encountering delays or difficulties increases as we manufacture more complex products. In addition, if demand for our products increases, we will need to expand our operations to manufacture sufficient quantities of products without increasing our production times or our unit costs. As a result of such expansion, we could be required to purchase new equipment, upgrade existing equipment, develop and implement new manufacturing processes and hire additional technical personnel. Further, new or expanded manufacturing facilities could be subject to qualification by our customers. In the past, we have experienced certain difficulties in expanding our operations to manufacture our products in volume on time and at acceptable cost. Any difficulties in expanding our manufacturing operations could cause product delivery delays and lost sales. If demand for our products decreases, we could have excess manufacturing capacity. The fixed costs associated with excess manufacturing capacity could cause our operating results to decline. If we are unable to achieve further manufacturing efficiencies and cost reductions, particularly if we are experiencing pricing pressures in the marketplace, our operating results could suffer.

If we do not innovate and keep pace with technological developments in the semiconductor industry, our products might not be competitive and our revenues and operating results could suffer.

We must continue to innovate and to invest in research and development to improve our competitive position and to meet the needs of our customers. Our future growth depends, in significant part, upon our ability to work effectively with and anticipate the testing needs of our customers, and on our ability to develop and support new products and product enhancements to meet these needs on a timely and cost-effective basis. Our customers’ testing needs are becoming more challenging as the semiconductor industry continues to experience rapid technological change driven by the demand for complex circuits that are shrinking in size and at the same time are increasing in speed and functionality and becoming less expensive to produce. Examples of recent trends driving demand for technological research and development include semiconductor manufacturers’ transitions to 110 nanometer, 100 nanometer, 90 nanometer and 70 nanometer technology nodes, to 512 megabit density devices and to Double Data Rate II, or DDR II, architecture devices. By further example, the anticipated transition to Double Data Rate III, or DDR III, architecture devices will be a technological change for the semiconductor industry. Our customers expect that they will be able to integrate our wafer probe cards into any manufacturing process as soon as it is deployed. Therefore, to meet these expectations and remain competitive, we must continually design, develop and introduce on a timely basis new products and product enhancements with improved features. Successful product design, development and introduction on a timely basis require that we:

	•		design innovative and performance-enhancing features that differentiate our products from those of our competitors;

	•		transition our products to new manufacturing technologies;

	•		identify emerging technological trends in our target markets;

	•		maintain effective marketing strategies;

	•		respond effectively to technological changes or product announcements by others; and

	•		adjust to changing market conditions quickly and cost-effectively.

We must devote significant research and development resources to keep up with the rapidly evolving technologies used in semiconductor manufacturing processes. Not only do we need the technical expertise to implement the changes necessary to keep our technologies current, but we must also rely heavily on the judgment of our management to anticipate future market trends. If we are unable to timely predict industry changes, or if we are unable to modify our products on a timely basis, we might lose customers or market share. In addition, we might not be able to recover our research and development expenditures, which could harm our operating results.

If semiconductor memory device manufacturers delay or discontinue the conversion to 300 mm wafers, our growth could be impeded.

The growth of our business for the foreseeable future depends in large part upon sales of our wafer probe cards to manufacturers of dynamic random access memory, or DRAM, and flash memory devices. The previous downturn in the semiconductor industry caused various chip manufacturers to readdress their respective strategies for converting existing 200 mm wafer fabrication facilities to 300 mm wafer fabrication, or for building new 300 mm wafer fabrication facilities. Some manufacturers have delayed, cancelled or postponed previously announced plans to convert to 300 mm wafer fabrication. We believe that the decision to convert to a 300 mm wafer fabrication facility, or to ramp a 300mm facility, is made by each manufacturer based upon both internal and external factors, such as:

	•		current and projected chip prices;

	•		projected price erosion for the manufacturer’s particular chips;

	•		supply and demand issues;

	•		overall manufacturing capability within the manufacturer’s target market(s);

	•		the availability of funds to the manufacturer;

	•		the technology roadmap of the manufacturer; and

	•		the price and availability of equipment needed within the 300 mm facility.

One or more of these internal and external factors, as well as other factors, including factors that a manufacturer may choose to not publicly disclose, can impact the decision to maintain a 300 mm conversion schedule, to delay the conversion schedule for a period of time, to delay the actual full scale production of chips at a 300 mm facility, or to cancel the conversion to or building of a 300 mm facility. It is also possible that the conversion to 300 mm wafers will occur on different schedules for DRAM chip manufacturers and flash memory chip manufacturers. We have invested significant resources to develop technology that addresses the market for 300 mm wafers. If manufacturers of memory devices delay or discontinue their current 300 mm wafer conversion, or make the transition more slowly than we currently expect, our growth and profitability could be impeded. In addition, any delay in large-scale adoption of manufacturing based upon 300 mm wafers would provide time for other companies to develop and market products that compete with ours, which could harm our competitive position.

We depend upon the sale of our wafer probe cards for substantially all of our revenues, and a downturn in demand for our products could have a more disproportionate impact on our revenues than if we derived revenues from a more diversified product offering.

Historically, we have derived substantially all of our revenues from the sale of our wafer probe cards. We anticipate that sales of our wafer probe cards will represent a substantial majority of our revenues for the foreseeable future. Our business depends in large part upon continued demand in current markets for, and adoption in new markets of, current and future generations of our wafer probe cards. Large-scale market adoption depends upon our ability to increase customer awareness of the benefits of our wafer probe cards and to prove their reliability, ability to increase yields and cost effectiveness. We may be unable to sell our wafer probe cards to certain potential customers unless those customers change their device test strategies, change their wafer probe card and capital equipment buying strategies, or change or upgrade their existing test equipment. We might not be able to sustain or increase our revenues from sales of our wafer probe cards, particularly if conditions in the semiconductor market deteriorate or do not improve or if the market enters into another downturn in the future. Any decrease in revenues from sales of our wafer probe cards could harm our business more than it would if we offered a more diversified line of products.

If demand for our products in the memory device and flip chip logic markets declines or fails to grow as we anticipate, our revenues could decline.

We derive substantially all of our revenues from wafer probe cards that we sell to manufacturers of DRAM memory and flash memory devices and manufacturers of microprocessor, chipset and other logic devices. In the microprocessor, chipset and other logic device markets, our products are primarily used for devices employing flip chip packaging, which are commonly referred to as flip chip logic devices. In the three and nine months ended September 24, 2005, sales to manufacturers of DRAM devices accounted for 75.8% and 77.1%, respectively, of our revenues, sales to manufacturers of logic devices accounted for 10.2% and 8.4%, respectively, of our revenues, and sales to manufacturers of flash memory devices accounted for 14.0% and 14.2%, respectively, of our revenues. In the three and nine months ended September 25, 2004, sales to manufacturers of DRAM devices accounted for 67.3% and 69.0%, respectively, of our revenues, sales to manufacturers of logic devices accounted for 6.6% and 8.7%, respectively, of our revenues, and sales to manufacturers of flash memory devices accounted for 24.7% and 21.0%, respectively, of our revenues. Therefore, our success depends in part upon the continued acceptance of our products within these markets and our ability to continue to develop and introduce new products on a timely basis for these markets.

A substantial portion of these semiconductor devices is sold to manufacturers of personal computers and computer-related products and to manufacturers of personal electronic devices. Both the personal computer market and the personal electronic devices market have historically been characterized by significant fluctuations in demand and continuous efforts to reduce costs, which in turn have affected the demand for and price of memory devices and microprocessors. The personal computer market and the personal electronic devices market might not grow in the future at historical rates or at all and design activity in those markets might decrease, which could negatively affect our revenues and operating results.

The markets in which we participate are highly competitive, and if we do not compete effectively, our operating results could be harmed.

The wafer probe card market is highly competitive. With the introduction of new technologies and market entrants, we expect competition to intensify in the future. In the past, increased competition has resulted in price reductions, reduced gross margins or loss of market share, and could do so in the future. Competitors might introduce new competitive products for the same markets that our products currently serve. These products may have better performance, lower prices and broader acceptance than our products. In addition, for products such as wafer probe cards, semiconductor manufacturers typically qualify more than one source, to avoid dependence on a single source of supply. As a result, our customers will likely purchase products from our competitors. Current and potential competitors include AMST Co., Ltd., Cascade Microtech, Inc., Feinmetall GmbH, Japan Electronic Materials Corporation, Kulicke and Soffa Industries, Inc., Micronics Japan Co., Ltd., Phicom Corporation, Tokyo Cathode Laboratory Co., Ltd. and Tokyo Electron, Ltd., among others. Many of our current and potential competitors have greater name recognition, larger customer bases, more established customer relationships or greater financial, technical, manufacturing, marketing and other resources than we do. As a result, they might be able to respond more quickly to new or emerging technologies and changes in customer requirements, devote greater resources to the development, promotion, sale and support of their products, and reduce prices to increase market share. Some of our competitors also supply other types of test equipment, or offer both advanced wafer probe cards and needle probe cards. Those competitors that offer both advanced wafer probe cards and needle probe cards might have strong, existing relationships with our customers or with potential customers. Because we do not offer a needle probe card or other conventional technology wafer probe card for less advanced applications, it may be difficult for us to introduce our advanced wafer probe cards to these customers and potential customers for certain wafer test applications. It is possible that existing or new competitors, including test equipment manufacturers, may offer new technologies that reduce the value of our wafer probe cards.

We derive a substantial portion of our revenues from a small number of customers, and our revenues could decline significantly if any major customer cancels, reduces or delays a purchase of our products.

A relatively small number of customers has accounted for a significant portion of our revenues in any particular period. In the three and nine months ended September 24, 2005, four customers accounted for 80.1% and 73.2%, respectively, of our revenues. In the three and nine months ended September 25, 2004, four customers accounted for 65.0% and 64.0%, respectively, of our revenues. Our ten largest customers accounted for 98.6% and 97.4%, respectively, of our revenues in the three and nine months ended September 24, 2005 and 93.9% and 94.7%, respectively, of our revenues in the three and nine months ended September 25, 2004. We anticipate that sales of our products to a relatively small number of customers will continue to account for a significant portion of our revenues. The cancellation or deferral of even a small number of purchases of our products could cause our revenues to decline in any particular quarter. A number of factors could cause customers to cancel or defer orders, including manufacturing delays, interruptions to our customers’ operations due to fire, natural disasters or other events or a downturn in the semiconductor industry. Our agreements with our customers do not contain minimum purchase commitments, and our customers could cease purchasing our products with short or no notice to us or fail to pay all or part of an invoice. In some situations, our customers might be able to cancel orders without

a significant penalty. In addition, consolidation in the semiconductor industry, particularly among manufacturers of DRAMs, could reduce our customer base and lead to lost or delayed sales and reduced demand for our wafer probe cards. Industry consolidation also could result in pricing pressures as larger DRAM manufacturers could have sufficient bargaining power to demand reduced prices and favorable nonstandard terms. Additionally, certain customers may not want to rely entirely or substantially on a single wafer probe card supplier and, as a result, such customers could reduce their purchases of our wafer probe cards.

If our relationships with our customers and companies that manufacture semiconductor test equipment deteriorate, our product development activities could be harmed.

The success of our product development efforts depends upon our ability to anticipate market trends and to collaborate closely with our customers and with companies that manufacture semiconductor test equipment. Our relationships with these customers and companies provide us with access to valuable information regarding manufacturing and process technology trends in the semiconductor industry, which enables us to better plan our product development activities. These relationships also provide us with opportunities to understand the performance and functionality requirements of our customers, which improve our ability to customize our products to fulfill their needs. Our relationships with test equipment companies are important to us because test equipment companies can design our wafer probe cards into their equipment and provide us with the insight into their product plans that allows us to offer wafer probe cards for use with their products when they are introduced to the market. Our relationships with our customers and test equipment companies could deteriorate if they:

	•		become concerned about our ability to protect their intellectual property;

	•		become concerned with our ability to deliver quality products on a timely basis;

	•		develop their own solutions to address the need for testing improvement;

	•		implement chip designs that include enhanced built-in self-test capabilities;

	•		regard us as a competitor;

	•		introduce their own wafer probe card product;

	•		establish relationships with others in our industry; or

	•		attempt to restrict our ability to enter into relationships with their competitors.

Many of our customers and the test equipment companies we work with are large companies. The consequences of a deterioration in our relationship with any of these companies could be exacerbated due to the significant influence these companies can exert in our markets. If our current relationships with our customers and test equipment companies deteriorate, or if we are unable to develop similar collaborative relationships with important customers and test equipment companies in the future, our long-term ability to produce commercially successful products could be impaired.

Because we generally do not have a sufficient backlog of unfilled orders to meet our quarterly revenue targets, revenues in any quarter are substantially dependent upon customer orders received and fulfilled in that quarter.

Our revenues are difficult to forecast because we generally do not have a sufficient backlog of unfilled orders to meet our quarterly revenue targets at the beginning of a quarter. Rather, a substantial percentage of our revenues in any quarter depends upon customer orders for our wafer probe cards that we receive and fulfill in that quarter. Because our expense levels are based in part on our expectations as to future revenues and to a large extent are fixed in the short term, we might be unable to adjust spending in time to compensate for any unexpected shortfall in revenues. Accordingly, any significant shortfall of revenues in relation to our expectations could hurt our operating results.

We presently rely upon a distributor for a portion of our revenues, and the change in that relationship, or other disruption or other change in our relationship with our distributor could have a negative impact on our revenues.

Spirox Corporation, our distributor in Singapore, Philippines and China, was also our distributor in Taiwan through October 17, 2005 and we relied on Spirox for a substantial portion of our revenues for the three and nine months ended September 24, 2005. Sales to Spirox accounted for 18.6% and 25.7%, respectively, of our revenues in the three and nine months ended September 24, 2005 and 20.9% and 17.2%, respectively, of our revenues in the three and nine months ended September 25, 2004. Spirox also provides customer support. We recently announced the termination of our agreement with Spirox with respect to the distribution of our products in Taiwan. The termination, which was effective in October 2005, is part of our transition to a direct sales model in Taiwan. The reduction in the sales or service efforts or financial viability of our distributor, or deterioration in, or termination of, any part of our relationship with our distributor could harm our revenues, our operating results and our ability to support our customers in the distributor’s territory. In addition, if we are required to establish alternative sales channels in the region through a different distributor or through an independent sales representative, or if we make the decision to sell direct into the region as we, for example, have undertaken in Taiwan, it could consume substantial time and resources, decrease our revenues and increase our expenses.

If our relationships with our independent sales representatives change, our business could be harmed.

We currently rely on independent sales representatives to assist us in the sale of our products in various geographic regions. If we make the business decision to terminate or modify our relationships with one or more of our independent sales representatives, or if an independent sales representative decides to disengage from us, and we do not effectively and efficiently manage such a change, we could lose sales from existing customers and fail to obtain new customers.

If semiconductor manufacturers do not migrate elements of final test to wafer probe test, market acceptance of other applications of our technology could be delayed.

We intend to work with our customers to migrate elements of final test from the device level to the wafer level. This migration will involve a change in semiconductor test strategies from concentrating final test at the individual device level to increasing the amount of test at the wafer level. Semiconductor manufacturers typically take time to qualify new strategies that affect their testing operations. As a result, general acceptance of wafer-level final test might not occur in the near term or at all. In addition, semiconductor manufacturers might not accept and use wafer-level final test in a way that uses our technology. If the migration of elements of final test to wafer probe test does not grow as we anticipate, or if semiconductor manufacturers do not adopt our technology for their wafer probe test requirements, market acceptance of other applications for our technology could be delayed. In addition, if various manufacturers do not elect to invest in wafer test technology enabling the identification of known good die, or KGD, or if the projected or anticipated investment in such technology is delayed or reduced, it could delay the introduction of our technologies and negatively impact our business.

Changes in test strategies, equipment and processes could cause us to lose revenues.

The demand for wafer probe cards depends in large part upon the number of semiconductor designs and the overall semiconductor unit volume. The time it takes to test a wafer depends upon the number of devices being tested, the complexity of these devices, the test software program and the test equipment itself. As test programs become increasingly effective and test throughput increases, the number of wafer probe cards required to test a given volume of devices declines. Therefore, advances in the test process could cause us to lose sales.

If semiconductor manufacturers implement chip designs that include increased built-in self-test capabilities, or similar functions or methodologies that increase test throughput, it could negatively impact our sales or the migration of elements of final test to the wafer level. Additionally, if new chip designs or types of chips are implemented that require less, or even no, test using wafer probe cards, or significantly reduce wafer test complexity, our revenues could be impacted. Further, if new chip designs are implemented which we are unable to test, or which we are unable to test efficiently and provide our customers with an acceptably low overall cost of test, our revenues could be negatively impacted.

We incur significant research and development expenses in conjunction with the introduction of new product architectures and platforms. Often, we time our product introductions to the introduction of new test equipment platforms or the declination of manufacturers to adopt a new test platform. Because our customers require both test equipment and wafer probe cards, any delay or disruption in the introduction of new test equipment platforms would negatively affect our growth.

We manufacture our products at our facilities in Livermore, California, and any disruption in the operations of these facilities could adversely impact our business and operating results.

Our processes for manufacturing our wafer probe cards require sophisticated and costly equipment and a specially designed facility, including a semiconductor clean room. We manufacture our wafer probe cards at our new facility located in Livermore, California, with some manufacturing functions continuing at our old facility, which is also located in Livermore. We plan to complete the transition of our manufacturing operations to our new facility by the end of the first quarter of fiscal 2006. Any disruption in the operation of either of our facilities, whether due to contamination in our manufacturing process, technical or labor difficulties, destruction or damage from fire or earthquake, infrastructure failures such as power or water shortage or any other reason, could interrupt our manufacturing operations, impair critical systems, disrupt communications with our customers and suppliers and cause us to write off inventory and to lose sales. In addition, if the previous energy crises in California that resulted in disruptions in power supply and increases in utility costs were to recur, we might experience power interruptions and shortages, which could disrupt our manufacturing operations. This could subject us to loss of revenues as well as significantly higher costs of energy. Further, current and potential customers might not purchase our products if they perceive our lack of a fully operational alternate manufacturing facility to be a risk to their continuing source of supply.

If we do not transition effectively to our new operations and manufacturing site, our manufacturing capacity will be negatively impacted.

We initiated the move into our new campus facility in Livermore in 2004. By the end of the first quarter of 2006, we anticipate completing the bring-up of our new manufacturing facility in Livermore and the transition of our manufacturing operations from our existing facility to our new facility. The costs of starting up our new manufacturing facility, including capital costs such as equipment and fixed costs such as rent, and transition costs, including personnel and material expenses required for the new site ramp and qualification, redundancy costs of maintaining two production sites in parallel, and any close down of our existing manufacturing facilities, are substantial. We might not be able to shift efficiently or effectively from our old facility where certain functions for the manufacture of our wafer probe card continues to occur to the new production facility. Our current transition plan will require us to have both our old and new manufacturing facilities operational through the end of the first quarter of fiscal 2006. This will cause us to incur significant costs due to redundancy of infrastructure at both sites. Furthermore, the qualification of the new manufacturing facility will require us to use materials and build product and product components that will not be sold to our customers, causing higher than normal material spending. The transition might also lead to manufacturing interruptions, which could mean delayed deliveries or lost sales. Some or all of our customers could require a full qualification of our new facility. Any qualification process could take longer than we anticipate. Any difficulties with the transition or with bringing the new manufacturing facility to full capacity and volume production could increase our costs, disrupt our production process and cause delays in product delivery and lost sales, which would harm our operating results.

If we are unable to continue to reduce the time it takes for us to design and produce a wafer probe card, our growth could be impeded.

Our customers continuously seek to reduce the time it takes them to introduce new products to market. The cyclicality of the semiconductor industry, coupled with changing demands for semiconductor devices, requires our customers to be flexible and highly adaptable to changes in the volume and mix of products they must produce. Each of those changes requires a new design and each new design requires a new wafer probe card. For some existing semiconductor devices, the manufacturers’ volume and mix of product requirements are such that we are unable to design, manufacture and ship products to meet such manufacturers’ relatively short cycle time requirements. If we are unable to reduce the time it takes for us to design, manufacture and ship our products in response to the needs of our customers, our competitive position could be harmed. If we are unable to meet a customer’s schedule for wafer probe cards for a particular design, our customer might purchase wafer probe cards from a competitor and we might lose sales.

We obtain some of the components and materials we use in our products from a single or sole source or a limited group of suppliers, and the partial or complete loss of one of these suppliers could cause production delays and a substantial loss of revenues.

We obtain some of the components and materials used in our products, such as printed circuit board assemblies, plating materials and ceramic substrates, from a single or sole source or a limited group of suppliers. Alternative sources are not currently available for sole source components and materials. Because we rely on purchase orders rather than long-term contracts with the majority of our suppliers, we cannot predict with certainty our ability to obtain components and materials in the longer term. A sole or limited source supplier could increase prices, which could lead to a decline in our gross margin. Our dependence upon sole or limited source

suppliers exposes us to several other risks, including a potential inability to obtain an adequate supply of materials, late deliveries and poor component quality. Disruption or termination of the supply of components or materials could delay shipments of our products, damage our customer relationships and reduce our revenues. For example, if we were unable to obtain an adequate supply of a component or material, we might have to use a substitute component or material, which could require us to make changes in our manufacturing process. From time to time in the past, we have experienced difficulties in receiving shipments from one or more of our suppliers, especially during periods of high demand for our products. If we cannot obtain an adequate supply of the components and materials we require, or do not receive them in a timely manner, we might be required to identify new suppliers. We might not be able to identify new suppliers on a timely basis or at all. We, as well our customers would also need to qualify any new suppliers. The lead-time required to identify and qualify new suppliers could affect our ability to timely ship our products and cause our operating results to suffer. Further, a sole or limited source supplier could require us to enter into non-cancelable purchase commitments or pay in advance to ensure our source of supply. In an industry downturn, or in an environment in which growth is not at a level we projected or anticipated, commitments of this type could result in charges for excess inventory of parts. If we are unable to predict our component and materials needs accurately, or if our supply is disrupted, we might miss market opportunities by not being able to meet the demand for our products.

Wafer probe cards that do not meet specifications or that contain defects could damage our reputation, decrease market acceptance of our technology, cause us to lose customers and revenues, and result in liability to us.

The complexity and ongoing development of our wafer probe card manufacturing process, combined with increases in wafer probe card production volumes, have in the past and could in the future lead to design or manufacturing problems. For example, we have experienced the presence of contaminants in our plating baths, which have caused a decrease in our manufacturing yields or have resulted in unanticipated stress-related failures when our wafer probe cards are being used in the manufacturing test environment. A further example is that during our fiscal quarter ending December 25, 2004, we experienced a contamination problem in our manufacturing line. This contamination problem caused a yield decline that, in turn, resulted in our inability to timely ship products to our customers. Manufacturing design errors such as the miswiring of a wafer probe card or the incorrect placement of probe contact elements have caused us to repeat manufacturing design steps. In addition to these examples, problems might result from a number of factors, including design defects, materials failures, contamination in the manufacturing environment, impurities in the materials used, unknown sensitivities to process conditions, such as temperature and humidity, and equipment failures. As a result, our products have in the past contained and might in the future contain undetected errors or defects. Any errors or defects could:

	•		cause lower than anticipated yields and lengthening of delivery schedules;

	•		cause delays in product shipments;

	•		cause delays in new product introductions;

	•		cause us to incur warranty expenses;

	•		result in increased costs and diversion of development resources;

	•		cause us to incur increased charges due to unusable inventory;

	•		require design modifications; or

	•		decrease market acceptance or customer satisfaction with these products.

The occurrence of any one or more of these events could hurt our operating results.

In addition, if any of our products fails to meet specifications or has reliability, quality or compatibility problems, our reputation could be damaged significantly and customers might be reluctant to buy our products, which could result in a decline in revenues, an increase in product returns or warranty costs and the loss of existing customers or the failure to attract new customers. Our customers use our products with test equipment and software in their manufacturing facilities. Our products must be compatible with the customers’ equipment and software to form an integrated system. If the system does not function properly, we could be required to provide field application engineers to locate the problem, which can take time and resources. If the problem relates to our wafer probe cards, we might have to invest significant capital, manufacturing capacity and other resources to correct it. Our current or potential customers also might seek to recover from us any losses resulting from defects or failures in our products. Liability claims could require us to spend significant time and money in litigation or to pay significant damages.

If we fail to accurately forecast demand for our products, we could incur inventory losses.

Each semiconductor chip design requires a custom wafer probe card. Because our products are design-specific, demand for our products is difficult to forecast. Due to our customers’ short delivery time requirements, we often design, procure materials and, at times, produce our products in anticipation of demand for our products rather than in response to an order. Due to the uncertainty inherent in forecasts, we are, and expect to continue to be, subject to inventory risk. If we do not obtain orders as we anticipate, we could have excess inventory for a specific customer design that we would not be able to sell to any other customer, which would likely result in inventory write-offs.

If we fail to effectively manage our service centers, our business might be harmed.

In 2002, we expanded our repair and service center in Seoul, South Korea. In 2003, we opened a repair and service center in Dresden, Germany. In 2004 we opened a repair and service center in Tokyo, Japan, and we are opening a service and design center in Taiwan. These service centers are part of our strategy to, among other things, provide our customers with more efficient service and repair of our wafer probe cards. If we are unable to effectively manage our service centers, or do not expand or enhance our service centers, or open additional service centers, to meet customer demand, or if the work undertaken in the service centers is not equivalent to the level and quality provided by repairs and services performed by our North American repair and service operations, which are part of our manufacturing facility in Livermore, California, we could incur higher wafer probe card repair and service costs, which could harm our operating results.

If we do not effectively manage changes in our business, these changes could place a significant strain on our management and operations and, as a result, our business might not succeed.

Our ability to grow successfully requires an effective planning and management process. We plan to increase the scope of our operations and the size of our direct sales force domestically and internationally. For example, we have leased a new facility in Livermore, California and moved our corporate headquarters and have been transitioning our manufacturing operations into this new facility. Our growth could place a significant strain on our management systems, infrastructure and other resources. To manage our growth effectively, we must invest the necessary capital and continue to improve and expand our controls, systems and infrastructure in a timely and efficient manner. Those resources might not be available when we need them, which would limit our growth. Certain of our officers have limited experience in managing large or rapidly growing businesses. In addition, certain members of our management have limited experience in managing a public company or communicating with securities analysts and public company investors. Our controls, systems and procedures might not be adequate to support a growing public company. If our management fails to respond effectively to changes in our business, our business might not succeed.

If we fail to attract, integrate and retain qualified personnel, our business might be harmed.

Our future success depends largely upon the continued service of our key management, technical, and sales and marketing personnel, and on our continued ability to hire, integrate and retain qualified individuals, particularly engineers and sales and marketing personnel in order to increase market awareness of our products and to increase revenues. For example, in the future, we might need technical personnel experienced in competencies that we do not currently have or require. Competition for qualified individuals may be intense, and we might not be successful in retaining our employees or attracting new personnel. The loss of any key employee, the inability to successfully integrate replacement personnel, the failure of any key employee to perform in his or her current position or our inability to attract and retain skilled employees as needed could impair our ability to meet customer and technological demands. All of our key personnel in the United States are employees at-will.

We may make acquisitions, which could put a strain on our resources, cause ownership dilution to our stockholders and adversely affect our financial results.

While we have made no acquisitions of businesses, products or technologies in the past, we may make acquisitions of complementary businesses, products or technologies in the future. Integrating newly acquired businesses, products or technologies into our company could put a strain on our resources, could be expensive and time consuming, and might not be successful. Future acquisitions could divert our management’s attention from other business concerns and expose our business to unforeseen liabilities or risks associated with entering new markets. In addition, we might lose key employees while integrating new organizations. Consequently, we might not be successful in integrating any acquired businesses, products or technologies, and might not achieve anticipated revenues and cost benefits. In addition, future acquisitions could result in customer dissatisfaction, performance problems with an acquired company, potentially dilutive issuances of equity securities or the incurrence of debt, contingent liabilities, possible impairment charges related to goodwill or other intangible assets or other unanticipated events or circumstances, any of which could harm our business.

As part of our sales process, we could incur substantial sales and engineering expenses that do not result in revenues, which would harm our operating results.

Our customers generally expend significant efforts evaluating and qualifying our products prior to placing an order. The time that our customers require to evaluate and qualify our wafer probe cards is typically between three and 12 months and sometimes longer. While our customers are evaluating our products, we might incur substantial sales, marketing, and research and development expenses. For example, we typically expend significant resources educating our prospective customers regarding the uses and benefits of our wafer probe cards and developing wafer probe cards customized to the potential customer’s needs, for which we might not be reimbursed. Although we commit substantial resources to our sales efforts, we might never receive any revenues from a customer. For example, many semiconductor designs never reach production, including designs for which we have expended design effort and expense. In addition, prospective customers might decide not to use our wafer probe cards. The length of time that it takes for the evaluation process and for us to make a sale depends upon many factors including:

	•		the efforts of our sales force and our distributor and independent sales representatives;

	•		the complexity of the customer’s fabrication processes;

	•		the internal technical capabilities of the customer; and

	•		the customer’s budgetary constraints and, in particular, the customer’s ability to devote resources to the evaluation process.

In addition, product purchases are frequently subject to delays, particularly with respect to large customers for which our products may represent a small percentage of their overall purchases. As a result, our sales cycles are unpredictable. If we incur substantial sales and engineering expenses without generating revenues, our operating results could be harmed.

From time to time, we might be subject to claims of infringement of other parties’ proprietary rights, or to claims that our intellectual property rights are invalid or unenforceable, which could result in significant expense and loss of intellectual property rights.

In the future, we might receive claims that we are infringing intellectual property rights of others, or claims that our patents or other intellectual property rights are invalid or unenforceable. We have received in the past, and may receive in the future, communications from third parties inquiring about our interest in licensing certain of their intellectual property or more generally identifying intellectual property that may be of interest to us. For example, we received such a communication from Microelectronics and Computer Technology Corporation in October 2001, with a follow-up letter in January 2002, inquiring about our interest in acquiring a license to certain of their patents and technology, and from IBM Corporation in February 2002, with a follow-up letter in August 2003, inquiring about our interest and need to acquire a license to IBM patents and technology related to high density integrated probes. We have not engaged in a dialog with Microelectronics and Computer Technology Corporation. We have engaged in a dialog with IBM Corporation regarding our companies’ respective intellectual property portfolios and technologies, and anticipate that this dialog will continue. In August 2002, subsequent to our initiating correspondence with Japan Electronic Materials Corporation regarding the scope of our intellectual property rights and the potential applicability of those rights to certain of its wafer probe cards, Japan Electronic Materials Corporation offered that precedent technologies exist as to one of our foreign patents that we had identified, and also referenced a U.S. patent in which it stated we might take interest. For the inquiries we have received to date, we do not believe we infringe any of the identified patents and technology. The semiconductor industry is characterized by uncertain and conflicting intellectual property claims and vigorous protection and pursuit of these rights. The resolution of any claims of this nature, with or without merit, could be time consuming, result in costly litigation or cause product shipment delays. In the event of an adverse ruling, we might be required to pay substantial damages, cease the use or sale of infringing products, spend significant resources to develop non-infringing technology, discontinue the use of certain technology or enter into license agreements. License agreements, if required, might not be available on terms acceptable to us or at all. The loss of access to any of our intellectual property or the ability to use any of our technology could harm our business. A number of actions have been filed in Korea and in Taiwan challenging the validity of certain of our intellectual property rights. We have been successful in defending our intellectual property against certain of these claims, but not all. For example, on October 27, 2005, the Korean Patent Court issued an oral ruling holding invalid certain claims of two of the Company’s Korean patents. The two Korean patents affected by the ruling are Nos. 278,342, entitled “Method of Altering the Orientation of Probe Elements in a Probe Card Assembly,” and 399,210, entitled “Probe Card Assembly”, both of which had previously been upheld by the Korean Intellectual Property Office when it dismissed validity challenges in their entirety. The outcome of any Company appeal of the ruling(s) of the Korean Patent Court can not be definitively predicted, but will result in the Company incurring additional expenses. While patents are territorial and a ruling on a certain given patent does not necessarily impact the validity or enforceability of a corresponding or related patent in a different country, the ruling might negatively impact our ability to enforce the corresponding or related patent.

If we fail to protect our proprietary rights, our competitors might gain access to our technology, which could adversely affect our ability to compete successfully in our markets and harm our operating results.

If we fail to protect our proprietary rights adequately, our competitors might gain access to our technology. Unauthorized parties might attempt to copy aspects of our products or to obtain and use information that we regard as proprietary. Others might independently develop similar or competing technologies or methods or design around our patents. In addition, the laws of many foreign countries in which we or our customers do business do not protect our intellectual property rights to the same extent as the laws of the United States. As a result, our competitors might offer similar products and we might not be able to compete successfully. We also cannot assure that:

	•		our means of protecting our proprietary rights will be adequate;

	•		patents will be issued from our currently pending or future applications;

	•		our existing patents or any new patents will be sufficient in scope or strength to provide any meaningful protection or commercial advantage to us;

	•		any patent, trademark or other intellectual property right that we own will not be invalidated, circumvented or challenged in the United States or foreign countries; or

	•		others will not misappropriate our proprietary technologies or independently develop similar technology, duplicate our products or design around any patent or other intellectual property rights that we own.

We might be required to spend significant resources to monitor and protect our intellectual property rights. We presently believe that it is likely that one or more of our competitors are using methodologies or have implemented structures into certain of their products that are covered by one or more of our intellectual property rights. See the “Legal Proceedings” section of this quarterly report for a description of the infringement actions we have brought against Phicom Corporation, one of our competitors, and the invalidity proceedings that Phicom is pursuing against certain of our patents. In addition to Phicom, other third parties have initiated challenges in foreign patent offices against certain of our other patents. While we do not have a monetary damages exposure in these various invalidity proceedings, it is possible we will incur material expenses in our litigation with Phicom or in defending our intellectual property more broadly. Any litigation, whether or not it is resolved in our favor, could result in significant expense to us and divert the efforts of our technical and management personnel. In addition, many of our customer contracts contain provisions that require us to indemnify our customers for third party intellectual property infringement claims, which would increase the cost to us of an adverse ruling in such a claim. An adverse determination could also negatively impact our ability to license certain of our technologies and methods to others.

Our failure to comply with environmental laws and regulations could subject us to significant fines and liabilities, and new laws and regulations or changes in regulatory interpretation or enforcement could make compliance more difficult and costly.

We are subject to various and frequently changing U.S. federal, state and local, and foreign governmental laws and regulations relating to the protection of the environment, including those governing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes, the cleanup of contaminated sites and the maintenance of a safe workplace. We could incur substantial costs, including cleanup costs, civil or criminal fines or sanctions and third-party claims for property damage or personal injury, as a result of violations of or liabilities under environmental laws and regulations or non-compliance with the environmental permits required at our facilities.

These laws, regulations and permits also could require the installation of costly pollution control equipment or operational changes to limit pollution emissions or decrease the likelihood of accidental releases of hazardous substances. In addition, new laws and regulations, stricter enforcement of existing laws and regulations, the discovery of previously unknown contamination at our or others’ sites or the imposition of new cleanup requirements could require us to curtail our operations, restrict our future expansion, subject us to liability and cause us to incur future costs that would have a negative effect on our operating results and cash flow.

Because we conduct some of our business internationally, we are subject to operational, economic, financial and political risks abroad.

Sales of our products to customers outside the United States have accounted for an important part of our revenues. Our international sales as a percentage of our revenues were 59.3% and 63.5%, respectively, for the three and nine months ended September 24, 2005 and 67.1% and 61.6%, respectively, for the three and nine months ended September 25, 2004. Additionally, certain of our Korean customers purchase through their North American subsidiaries. In the future, we expect international sales, particularly into Europe, Japan, South Korea and Taiwan, to continue to account for a significant percentage of our revenues. Accordingly, we will be subject to risks and challenges that we would not otherwise face if we conducted our business only in the United States. These risks and challenges include:

	•		compliance with a wide variety of foreign laws and regulations;

	•		legal uncertainties regarding taxes, tariffs, quotas, export controls, export licenses and other trade barriers;

	•		political and economic instability in, or foreign conflicts that involve or affect, the countries of our customers;

	•		difficulties in collecting accounts receivable and longer accounts receivable payment cycles;

	•		difficulties in staffing and managing personnel, distributors and representatives;

	•		reduced protection for intellectual property rights in some countries;

	•		currency exchange rate fluctuations, which could affect the value of our assets denominated in local currency, as well as the price of our products relative to locally produced products;

	•		seasonal fluctuations in purchasing patterns in other countries; and

	•		fluctuations in freight rates and transportation disruptions.

Any of these factors could harm our existing international operations and business or impair our ability to continue expanding into international markets.

We might require additional capital to support business growth, and such capital might not be available.

We intend to continue to make investments to support business growth and may require additional funds to respond to business challenges, which include the need to develop new products or enhance existing products, enhance our operating infrastructure and acquire complementary businesses and technologies. Accordingly, we may need to engage in equity or debt financing to secure additional funds. Equity and debt financing, however, might not be available when needed or, if available, might not be available on terms satisfactory to us. If we are unable to obtain adequate financing or financing on terms satisfactory to us, our ability to continue to support our business growth and to respond to business challenges could be significantly limited.

Our failure to remediate in a timely fashion our material weakness or our significant deficiencies in internal control over financial reporting could depress the trading price of our common stock.

In connection with our annual evaluation of our internal control over financial reporting, we identified one material weakness and several significant deficiencies. Although we have taken a number of steps during fiscal 2004 and the first three fiscal quarters of 2005 to address the material weakness and significant deficiencies, we have not been able to conclude that the material weakness, or that all of the significant deficiencies, have been fully remediated. If we, or our independent registered public accounting firm, identify a material weakness as of the end of fiscal 2005, the independent registered public accounting firm will be required to issue an adverse report on our internal control over financial reporting, which could adversely affect the trading price of our common stock.

Unanticipated changes in our tax rates or exposure to additional income tax liabilities could affect our profitability.

We are subject to income taxes in both the United States and various foreign jurisdictions, and our domestic and international tax liabilities are subject to the allocation of expenses in different jurisdictions. Our effective tax rate could be adversely affected by changes in the mix of earnings in countries with different statutory tax rates, changes in the valuation of deferred tax assets and

liabilities, changes in tax laws including pending tax law changes such as the benefit from export sales and the research and development credit, changes in our business model or in our manufacturing activities, and by material audit assessments. In particular, the carrying value of deferred tax assets, which are predominantly in the United States, is dependent on our ability to generate future taxable income in the United States. In addition, the amount of income taxes we pay could be subject to ongoing audits in various jurisdictions and a material assessment by a governing tax authority could affect our profitability.

The trading price of our common stock has been and is likely to continue to be volatile, and you might not be able to sell your shares at or above the price that you paid for them.

The trading prices of the securities of technology companies have been highly volatile, and from the date of our initial public offering in June 2003 through September 24, 2005, our stock price has ranged from $14.00 a share to $29.98 a share. The trading price of our common stock is likely to be subject to wide fluctuations. Further, our securities have a limited trading history. Factors affecting the trading price of our common stock include:

	•		variations in our operating results;

	•		announcements of technological innovations, new products or product enhancements, strategic alliances or significant agreements by us or by our competitors;

	•		recruitment or departure of key personnel;

	•		the gain or loss of significant orders or customers;

	•		changes in the estimates of our operating results or changes in recommendations by any securities analysts that elect to follow our common stock;

	•		market conditions in our industry, the industries of our customers and the economy as a whole; and

	•		sales or perceived sales of substantial amounts of our common stock held by existing stockholders.

In addition, if the market for technology stocks or the stock market in general experiences continued or greater loss of investor confidence, the trading price of our common stock could decline for reasons unrelated to our business, operating results or financial condition. The trading price of our common stock also might decline in reaction to events that affect other companies in our industry even if these events do not directly affect us.

The concentration of our capital stock ownership with insiders will likely limit your ability to influence corporate matters.

Our executive officers, directors, current 5% or greater stockholders and entities affiliated with any of them together beneficially own a large percentage of our outstanding common stock. As a result, these stockholders, acting together, have substantial influence over all matters that require approval by our stockholders, including the election of directors and approval of significant corporate transactions. As a result, corporate actions might be taken even if other stockholders, including you, oppose them. This concentration of ownership might also have the effect of delaying or preventing a change of control of our company that other stockholders may view as beneficial.

Provisions of our certificate of incorporation and bylaws or Delaware law might discourage, delay or prevent a change of control of our company or changes in our management and, therefore, depress the trading price of our common stock.

Delaware corporate law and our certificate of incorporation and bylaws contain provisions that could discourage, delay or prevent a change in control of our company or changes in our management that the stockholders of our company may deem advantageous. These provisions:

	•		establish a classified board of directors so that not all members of our board are elected at one time;

	•		provide that directors may only be removed “for cause” and only with the approval of 66 2/3% of our stockholders;

	•		require super-majority voting to amend some provisions in our certificate of incorporation and bylaws;

	•		authorize the issuance of “blank check” preferred stock that our board could issue to increase the number of outstanding shares and to discourage a takeover attempt;

	•		limit the ability of our stockholders to call special meetings of stockholders;

	•		prohibit stockholder action by written consent, which requires all stockholder actions to be taken at a meeting of our stockholders;

	•		provide that the board of directors is expressly authorized to make, alter or repeal our bylaws; and

	•		establish advance notice requirements for nominations for election to our board or for proposing matters that can be acted upon by stockholders at stockholder meetings.

In addition, Section 203 of the Delaware General Corporation Law may discourage, delay or prevent a change in control of our company. In addition, each of our named executive officers and certain other executives have entered into change of control severance agreements, which were approved by our Compensation Committee.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

Foreign Currency Exchange Risk. Our revenues, except in Japan, and our expenses, except those expenses related to our Germany, United Kingdom, Japan, Taiwan, Italy and Korea operations, are denominated in U.S. dollars. Revenues and accounts receivable from our Japanese customers are denominated in Japanese Yen. We may purchase from time to time forward exchange contracts to hedge certain existing foreign currency denominated accounts receivable. Gains and losses on these contracts are recognized in other expense, net when the related transactions being hedged are recognized.

As of September 24, 2005, we had two outstanding foreign exchange forward contracts to sell 158.7 million Yen for $1.4 million with a contract rate of 112.2 Yen per U.S. dollar. The fair value of these foreign currency forward exchange contracts as of September 24, 2005 would have changed by $140,000 if the foreign currency exchange rate for the Japanese Yen to the U.S. dollar on these forward contracts had changed by 10%. We do not use derivative financial instruments for trading or speculative purposes.

Interest Rate Risk. The primary objective of our investment activities is to preserve principal while at the same time maximizing the income we receive from our investments without significantly increasing risk. Some of the securities in which we invest may be subject to market risk. This means that a change in prevailing interest rates may cause the principal amount of the investment to fluctuate. For example, if we hold a security that was issued with an interest rate fixed at the then-prevailing rate and the prevailing interest rate later rises, the principal amount of our investment will probably decline. To minimize this risk in the future, we intend to maintain our portfolio of cash equivalents and marketable securities in a variety of securities, including commercial paper, money market funds, government and non-government debt securities and certificates of deposit. The risk associated with fluctuating interest rates is limited to our investment portfolio and we do not believe that a 10% change in interest rates will have a significant impact on our interest income. As of September 24, 2005, all of our investments were in money market accounts, certificates of deposit or high quality corporate debt obligations and U.S. government securities.

Item 4. Controls and Procedures

Disclosure Controls and Procedures

As required by Rule 13a-15(b) of the Securities Exchange Act of 1934, FormFactor management, including the Chief Executive Officer and Chief Financial Officer, conducted an evaluation as of September 24, 2005, of the effectiveness of FormFactor’s “disclosure controls and procedures” as defined in Exchange Act Rule 13a-15(e).

In the light of two restatements of previously issued financial statements and audit adjustments and revisions made in the fourth quarter to the 2004 financial statements, FormFactor’s management has concluded that FormFactor’s disclosure controls and procedures were not effective as of September 24, 2005. To address the deficiency, FormFactor has taken and expects to take the remediation steps described below. In addition, in connection with the preparation of this Quarterly Report, our management undertook and completed reconciliations, analyses, reviews and control procedures in addition to those historically completed to confirm that this Quarterly Report fairly presents in all material respects our financial condition, results of operations and cash flows as of, and for, the periods presented in accordance with generally accepted accounting principles.

Remediation Steps to Address Material Weakness

During the first three quarters of fiscal 2005, we took several steps toward remediation of the material weakness described above. We hired a Chief Financial Officer in the first quarter. In the second quarter we strengthened internal controls over the period-end financial reporting processes by implementing procedures to review and evaluate the impact of technical accounting issues pertaining to new and non-recurring transactions and we added controls for analyzing the impact of technical accounting literature on new and recurring transactions. In the third quarter we hired key personnel to strengthen the procedures implemented in the second fiscal quarter of 2005, including an Assistant Controller, a Senior Director of Treasury and Tax and a Director to manage our evaluation of our internal control over financial reporting in accordance with Sarbanes Oxley Act Section 404 control improvement program.

Even though process and control improvements have been implemented and additional key resources have been hired, we will continue to consider our disclosure controls and procedures not effective until testing of the improved processes and controls have been completed by our internal audit team.

Changes in Internal Control Over Financial Reporting

As required by Rule 13a-15(d) of the Securities Exchange Act of 1934, FormFactor management, including the Chief Executive Officer and Chief Financial Officer, also conducted an evaluation of FormFactor’s “internal control over financial reporting” as defined in Exchange Act Rule 13a-15(f) to determine whether any changes in FormFactor’s internal control over financial reporting occurred during the third quarter of 2005 that materially affected, or are reasonably likely to materially affect, FormFactor’s internal control over financial reporting. Based on that evaluation, other than as described above under the caption “Remediation Steps to Address Material Weakness”, there has been no such changes during the third quarter of fiscal 2005.

Limitation on Effectiveness of Controls

It should be noted that any system of controls, however well designed and operated, can provide only reasonable, and not absolute, assurance that the objectives of the system are met. The design of any control system is based, in part, upon the benefits of the control system relative to its costs. Control systems can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. In addition, over time, controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. In addition, the design of any control system is based in part upon certain assumptions about the likelihood of future events.

PART II. OTHER INFORMATION

Item 1. Legal Proceedings

From time to time, we may be subject to legal proceedings and claims in the ordinary course of business. As of the date of filing this quarterly report, we were not involved in any material legal proceedings, other than as set forth below.

In February 2004, we filed in the Seoul Southern District Court, located in Seoul, South Korea, two separate complaints against Phicom Corporation, a Korean corporation, alleging infringement of a total of four Korean patents issued to us. One complaint alleges that Phicom is infringing our Korean Patent Nos. 252,457, entitled “Method of Fabricating Interconnections Using Cantilever Elements and Sacrificial Substrates,” and 324,064, entitled “Contact Tip Structures for Microelectronic Interconnection Elements and Methods of Making Same.” The other complaint alleges Phicom is infringing our Korean Patent Nos. 278,342, entitled “Method of Altering the Orientation of Probe Elements in a Probe Card Assembly,” and 399,210, entitled “Probe Card Assembly.” Both complaints seek injunctive relief. The court actions are a part of our ongoing efforts to protect the intellectual property embodied in our proprietary technology, including our MicroSpring interconnect technology. In March 2004, Phicom filed in the Korean Intellectual Property Office invalidity actions challenging the validity of some or all of the claims of each of the four Company patents at issue in the Seoul infringement actions. The Korean Intellectual Property Office has dismissed Phicom’s challenges against all four of the patents-at-issue. Phicom has appealed the dismissals of the challenges to the Korean Patent Court. On October 27, 2005, the Korean Patent Court issued an oral ruling holding invalid certain claims of two of our Korean patents. We expect the Korean Patent Court to issue a written opinion in one to three weeks following its oral ruling. We intend to appeal the ruling of the Korean Patent Court.

On March 4, 2005, we filed a patent infringement lawsuit in federal district court in Oregon against Phicom charging that it is willfully infringing four U.S. patents that cover key aspects of our wafer probe cards. The complaint in this action alleges that Phicom has incorporated our proprietary technology into its products and seeks both injunctive relief and monetary damages. The U.S. patents identified in the complaint are U.S. Patent No. 5,974,662, entitled “Method of Planarizing Tips of Probe Elements of a Probe Card Assembly’’, U.S. Patent No. 6,246,247, entitled “Probe Card Assembly and Kit, and Methods of Using Same’’, U.S. Patent No. 6,624,648, entitled “Probe Card Assembly’’ and U.S. Patent No. 5,994,152, entitled “Fabricating Interconnects and Tips Using Sacrificial Substrates.” As of the date of this Quarterly Report, Phicom has confirmed service of the complaint under the Hague Convention on the Service Abroad of Judicial and Extrajudicial Documents in Civil or Commercial Matters, an international treaty. Phicom has not yet responded on the merits to the Complaint, but has filed a motion with the Oregon federal court asking that the lawsuit be transferred to the U.S. District Court for the Northern District of California, which is where the Company’s principal place of business is located.

We could incur material legal expenses with respect to these matters.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

Not applicable.

Item 3. Defaults Upon Senior Securities

Not applicable.

Item 4. Submission of Matters to a Vote of Security Holders

Not applicable

Item 5. Other Information

Not applicable.

Item 6. Exhibits

The following exhibits are filed herewith or incorporated herein by reference:

Incorporated by Reference

Exhibit

Date of

Exhibit

Filed

Number

Exhibit Description

Form

Filing

File Number

Number

Herewith

31.01

Certification of Chief Executive Officer pursuant to 15 U.S.C. Section 7241, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

31.02

Certification of Chief Financial Officer pursuant to 15 U.S.C. Section 7241, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

32.01*

Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002


*		This exhibit shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934 or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933 or the Securities Exchange Act of 1934, whether made before or after the date hereof and irrespective of any general incorporation language in any filings.

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.


	FORMFACTOR, INC.

	By:	/s/ RON C. FOSTER

		Ron C. Foster
		Chief Financial Officer
		(Principal Financial Officer and
		Duly Authorized Officer)
November 2, 2005

EXHIBIT INDEX

Incorporated by Reference

Exhibit

Date of

Exhibit

Filed

Number

Exhibit Description

Form

Filing

File Number

Number

Herewith

31.01

Certification of Chief Executive Officer pursuant to 15 U.S.C. Section 7241, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

31.02

Certification of Chief Financial Officer pursuant to 15 U.S.C. Section 7241, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

32.01*

Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002


*		This exhibit shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934 or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933 or the Securities Exchange Act of 1934, whether made before or after the date hereof and irrespective of any general incorporation language in any filings.

exv31w01

EXHIBIT 31.01

CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO 15 U.S.C. SECTION 7241, AS
ADOPTED PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, Igor Y. Khandros, certify that:

1.		I have reviewed the quarterly report on Form 10-Q of FormFactor, Inc., a Delaware corporation, for the period ended September 24, 2005, as filed with the Securities and Exchange Commission;

2.		Based on my knowledge, the quarterly report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by the quarterly report;

3.		Based on my knowledge, the financial statements, and other financial information included in the quarterly report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in the quarterly report;

4.		The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which the quarterly report is being prepared;

(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in the quarterly report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by the quarterly report based on such evaluation; and

(d) Disclosed in the quarterly report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.


Date: November 2, 2005		/s/ Igor Y. Khandros

		Igor Y. Khandros
		Chief Executive Officer

exv31w02

EXHIBIT 31.02

CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO 15 U.S.C. SECTION 7241,
AS ADOPTED PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, Ron C. Foster, certify that:

1.		I have reviewed the quarterly report on Form 10-Q of FormFactor, Inc., a Delaware corporation, for the period ended September 24, 2005, as filed with the Securities and Exchange Commission;

2.		Based on my knowledge, the quarterly report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by the quarterly report;

3.		Based on my knowledge, the financial statements, and other financial information included in the quarterly report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in the quarterly report;

4.		The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.


Date: November 2, 2005		/s/ Ron C. Foster

		Ron C. Foster
		Chief Financial Officer

exv32w01

EXHIBIT 32.01

CERTIFICATION OF
CHIEF EXECUTIVE OFFICER AND CHIEF FINANCIAL OFFICER
PURSUANT TO 18 U.S.C. SECTION 1350,
AS ADOPTED PURSUANT TO SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the quarterly report on Form 10-Q of FormFactor, Inc., a Delaware corporation, for the period ended September 24, 2005, as filed with the Securities and Exchange Commission, each of the undersigned officers of FormFactor, Inc. certifies pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that, to his respective knowledge:

	(1)		the quarterly report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended; and

	(2)		the information contained in the quarterly report fairly presents, in all material respects, the financial condition and results of operations of FormFactor, Inc. for the periods presented therein.


Date: November 2, 2005		/s/ Igor Y. Khandros

		Igor Y. Khandros
		Chief Executive Officer

Date: November 2, 2005		/s/ Ron C. Foster

		Ron C. Foster
		Chief Financial Officer

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents